Frigidaire Model - GLFU2067FW4 upright freezer with digital display. Unit is 3 years old. No manual available. About a year ago, the alarm started beeping continuously. Freezer was operating at good temperature so wasn't sure why alarm was going off. Last week, we noticed water on the floor around freezer and it wasn't running. It was unplugged for about 4 hours, then once plugged back in it operated fine except now the display is not on. We cannot adjust the temperature and do not know what is going on inside the unit without the display working. Have checked around and can't find any info on this problem nor can we get a manual for this unit.
See if this link to your manual works. http://www.managemylife.com/mmh/owner_manuals/266/FRIGIDAIRE-Upright-Freezer-L0603062?brand_name_search=GLFU2067FW4+FRIGIDAIRE
Doesn't seem to cover this particular issue in that manual. Freezer is working fine, but the tempt control/display is off so in essence we have no control over the temp. Startingwonder if it's a simple matter of the temp control being bad, but would rather get down to the actual cause short of just hanging parts on it til it works.
You might want to try taking the display control off and inspect it for any burnt or swollen looking parts looking at the solid state circuity.
If you don't see any problem put it back in and see if resetting it like that helps. I would replace the control if that doesn't help.
how do you resent a display
×
Sounds like display / control needs replacing
If the light is on and got set on 7 went will the light go off
Cany you remove the display? If so then disconnect it and reconnect it. Does it reset?
Hello,
I advice you check the the two links below to search for the manual of your unit because the manual will shed more light on what the problem is.
manualsonline.com
Or
manualnguide.com
Type any of the above the link on your web browser to search for the manual of your unit.
Take care.
Hello swanee3669 - Have you trying measuring the temperature inside the unit to confirmed that it matches the display? If so, I recommend contacting a professional to accurately diagnose the unit since it sounds like it could possibly have a bad sealed, thermostat or control board.
3,348 views
Usually answered in minutes!
Frigidaire Model - GLFU2067FW4 upright freezer with digital display. Unit is 3 years old. No manual available. About a year ago, the alarm started beeping continuously. Freezer was operating at good temperature so wasn't sure why alarm was going off. Last week, we noticed water on the floor around freezer and it wasn't running. It was unplugged for about 4 hours, then once plugged back in it operated fine except now the display is not on. We cannot adjust the temperature and do not know what is going on inside the unit without the display working. Have checked around and can't find any info on this problem nor can we get a manual for this unit.
Frigidaire Model - GLFU2067FW4 upright freezer with digital display. Unit is 3 years old. No manual available. About a year ago, the alarm started beeping continuously. Freezer was operating at good temperature so wasn't sure why alarm was going off. Last week, we noticed water on the floor around freezer and it wasn't running. It was unplugged for about 4 hours, then once plugged back in it operated fine except now the display is not on. We cannot adjust the temperature and do not know what is going on inside the unit without the display working. Have checked the manuals I have found for this unit, but none of them cover this specific issue.
I'd say that's about the best thing I can do at this point. I appreciate your help. Thank you.
×