I have misplaced my manual. My dryer stops after a few moments of running and symbols are displayed on the lcd. I need to know what they mean. The symbol looks like an E (without the top horizontal dash) and a 0. Is there a sight where I can get a new manual.?

If the LCD screen on your ASKO T761 clothes dryer is displaying a checkerboard of black squares, it could indicate an issue with the screen itself or the control board that manages the display. Here are a few possible causes and solutions:

1. Faulty LCD screen: The LCD screen may be damaged or malfunctioning, causing it to display the checkerboard pattern. In this case, you may need to replace the screen.
2. Control board issue: The control board is responsible for managing the functions of the dryer, including the display. If it is malfunctioning, it may cause the LCD screen to display the checkerboard pattern. In this case, you may need to replace the control board.
3. Loose connection: The connection between the LCD screen and the control board may be loose or disconnected. Make sure all connections are securely plugged in.
4. Software issue: If the issue is with the software, a firmware update or reinstalling the software may fix the problem.

TO CHECK ON YOUR PROBLEM YOU CALL AMANA OR WHO THE NAME BRAND .< 1 > GIVE THEN THE MODLE NUMBER / SREAL NUMBER .< 2 >GIVE THEM THE CODE THAT YOU SEE "4" . LOOK VERY CLOSLY AT YOUR DISPLAY AND SEE IF THERE IS A LETTER YOU CAN MAKE OOUT. THIS INFO WILL HELP GREATLY.

it would be helpful to know what kind of dryer it is.

The dryer has an hour glass symbol on it and won't dry ... Anybody know what this is ?

This is an issue with the thermostat. It will need to be replaced .

My ovens not working and don't know what picture to put it on

What camera are we talking about? A hand usually means image stabilization - it may show you that it's ON (working) or that you're moving and should stand still - it's hard to say without knowing what camera are you talking about.

Tom

Try using the function key for your display options

You should see a key related to your function key, generally a different color then the rest, labeled (F, Fun, FN, etc...) then look for a CRT/LCD, or LCD, or a symbol of a rounded square, or something resembling a monitor or screen.

Hold Fn and press that button, give it a few seconds. It should switch.

You can also hold a flash light up to the screen and see if there's any image, if this is the case then parts need to be replaced.

If you have any more questions please let us know. If this information has been helpful, please take a moment to rate the solution. Thank you.

Try using the function key for your display options

You should see a key related to your function key, generally a different color then the rest, labeled (F, Fun, FN, etc...) then look for a CRT/LCD, or LCD, or a symbol of a rounded square, or something resembling a monitor or screen.

Hold Fn and press that button, give it a few seconds. It should switch.

You can also hold a flash light up to the screen and see if there's any image, if this is the case then parts need to be replaced.

If you have any more questions please let us know. If this information has been helpful, please take a moment to rate the solution. Thank you.