Need a remote code for dish network that works with a NAXA Model NX-556
Hopefully you have resolved this issue, but if you have any additional problems or questions, here is some help. Follow the directions below, and that remote will be programmed right away.
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.
Becki Barned
DISH Network Customer Service
Did not work. Tried multiple times. Any other suggestions. BTW I am using remote 2 for this.
This does sound like it is a new brand of TV. I was not able to find any codes, that is why I gave the instructions to the power scan. Sometimes we have no codes in the database, but the power scan is able to find the correct code. WIth newer TVs, the codes may not be possible to get until the TV becomes a little more used. It looks as though we need to wait a little bit for codes and try again. I am sorry that this is the route that we need to take, but the remote will not program to every tv, and at times, the newer ones. I will keep you updated on new codes when I get them, and you can look them up at dishnetwork dot com.
Becki Barned
DISH Network Customer Service
×
1,456 views
Usually answered in minutes!
Does not work. Tried multiple times.
×