How do I clean the white ******** my new baby g watch?

If you have access to the watch face then take a cotton bud and mix some white vinegar with toothpaste and apply gently the.end leave for around 15 to 20 minutes.it should gleam like new.

go to this link to dowload the manual > http://world.casio.com/wat/download/en/manual/

you can dowload the manual off the link below
http://world.casio.com/wat/download/en/manual/

I've had to send mine to Casio every time I've needed a new band. It's a PIA. I wish I could find another way to replace it. They will only put the same band back on. I'd like a different band that is a little more durable. Good luck.

hmmm once discolored I do not think there is a way really to get rid of discoloration , this is usually caused by sun shinning down on white and sort of bleaching it.

there is only two things that I know of that might be able to help.
1 is use a arm and hammer magic eraser on the watch face this is the safer of the two things.

2 is use a mild rubbing alcohol ( WARNING: THIS COULD DAMAGE YOUR WATCH FURTHER) I would start of by mixing half and half with water the alcohol in small cup and using it lightly on face to see if it discolors watch further. If not start rubbing and see if it helps remove some of the discoloration. if it does not add some more alcohol and test small area to see if it does any damage or not if not try it again . keep doing this , you might be able to use the alcohol with out water just depends. I would always test tout first though.

To find a registered repair person in your area.
GOTO:
http://www.watch-clock-makers.org/
Hope this tip helps.
r/ David
http://antiqueclock.clockstop.com/

Try using goo gone it might work I have seen replacement parts at www.casiosalesandservice.com you call call them toll free to see if they have the replacement parts.

Follow this link: http://world.casio.com/wat/download/en/manual/ Enter module number and download instructions for your watch.
Rate me, plz.

Yor watch needs a cleaning. In the old days watches had a mainspring and when dirt got in the gears, the pressure from the mainspring would push the dirt out. Now with quartz watches there isn't any pressure to push the dirt out and the watch stops, or slows down. You will find that it cost more to repair than to get a new one. If you need anymore assistance PLEASE let me know and I will be glad to help.

Im a watch technician,and when im make adjustment to a new watch for me i dont need any manual,the thing ive done is keep pushing and pressing the button and observed what happen and the result i write what im discover new to me.When setting a baby g watch find the set and press it for 10 seconds.then your watch will flashing then go to mode button and choose what you are going to set.The hour ,the date ,the alarm whatever is there to set desame you going to do , only the set button need along press.Message me whatever you discover .