SOURCE: Childesign Shelby crib replacement parts
You know I just purchased a Childesigns crib from a garage sale thatI thought had everything needed. When I got home, we found it was missing one top plastic rod. Of course nothing will work without that. I found this webpage that sells a VERY similar product. http://www.productsamerica.com/page65.html. It is not exact, but to be able to use the crib, this was a good option for us. Hope this helps.
SOURCE: simmons baby crib
Have you tried the website: http://www.simmonskids.com/consumer_service.cfm
SOURCE: Trying to find replacement parts
call storkcraft 1-877-274-0277 7am-3pm pst or go to www.storkcraft.com
You can email them - they emailed me the instructions and parts list in a 16 page pdf.
[email protected]
Here are the instructions for your crib. Please review them
and see which parts you will need. We
accept Visa or Master Card. Parts are non returnable. Delivery is normally
7-10 business days. We do have replacement
parts for this crib. Please review the instructions and see what you will need.
J
Thank
you,
Cindy
Customer Service
Rep
Simmons Juvenile
Furniture
':Phone:
1-800-218-2741
':Phone:
1-920-779-4004
7:Fax:
1-920-779-4216
SOURCE: Trying to find replacement parts
Check out www.productsamerica.com have your model and serial # ready. Good Luck!!!!!!!!
ok first thing first , some graco cribs and other products from 2002 -2010 are being recalled , so what crib model do you have? second , putting together a crib is very easy , . First , take the head board and stand it up , next find the side railings and one by one put the screw thru the rail and into the headboard , hold it in place untill it is where it needs to be , then put the second railing on , the screws should go thru the rail and into the headboard with the headboard in back of the rails, after the rails are secured then hold the foot board in place untill the screws are fastened into the rails as well , after you do this , then go around and make sure all the screws are tightned, then take the mattress spring and place it inside the setup rails and screw it unto the places alotted for the screws , then after this , place the matress inside and your done....if this doesnt help , please email me at [email protected] and tell me which model it is
417 views
Usually answered in minutes!
×