Its showing e1 - Amana ACD106R Wall/Window Air Conditioner

All the Error codes and the fixes below.

https://www.searspartsdirect.com/diy/error-codes/sewing-machine-repair/1234596/kenmore-385-model-sewing-machine/0582

E1 Error
Zigzag motor error
Check/Repair
The E1 Error code appears when the needle bar is up and the sewing machine can't prepare the zigzag motor to start. Unplug the sewing machine and check the wiring connections on the zigzag motor and circuit board A. Replace the fuse on circuit board A if the fuse is blown. Replace circuit board A if it has a burned spot. Replace the zigzag motor if the fuse blows and circuit board A is okay. Possible parts
Fuse, circuit board A, zigzag motor

What To Do With E1 Error On Kenmore Sewing Machine?

Wayne Arthur Gallery https://www.waynearthurgallery.com > what-to-do-wit...

Sep 23, 2022 - Check the wiring connections on the zigzag motor and circuit board A. If there's a blown fuse, replace it. Disconnect the sewing machine to ...
Missing: 385.19233 ‎' Show results with: 385.19233

I have a new Kenmore sewing machine..I am receiving an ...

JustAnswer https://www.justanswer.com > Appliance Repair
Jul 11, 2011 - The E1 error code indicates that a fuse is blown on the control board. The first image below shows the fuse that corresponds to the E1 error ...
1 answer · Top answer: Hello I'm Larry and thank you for using this service. I'll be helping you with your ...

• 
  

  I have a Kenmore 385 sewing machine and keep getting ...

  https://www.justanswer.com > Appliance Repair
  Dec 22, 2009 · 1 answer
  For E1 and or E2 error most likely you'll have to replace the fuse on the control board with a fuse with a higher rating. Your complete model ...

Question edited for clarity.

E1 means the unit doesn't detect cookware on its' surface.

https://www.google.com/search?q=induction+cooker+top+e1+error+solution

..

E1 f5 code oven - YouTube

? 1:51
https://www.youtube.com/watch?v=5F1vwVpmG9U
Dec 28, 2014 - Uploaded by Jay Dornbos
Door locked then threw the code so now the door is locked and will not open. ...Whirlpool Oven - has E1 F5 ...

room thermistor error

You have to check the Speed sensor and its position.Normally you will find the speed sensor near motor pulley. In almost all treadmills E1 Error is related to speed sensor.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

h Air Conditioners
What does E1 mean in tadiran 250 R, it works then stops and screen shows E1 when it operates as a heater

The E1 error code indicates that the air intake filter is dirty or clogged and needs to be removed and cleaned. Turn the unit OFF & unplug it, before removing the filter. Never operate the unit without the filter in place. Doing so, can damage the unit.

Hope this helped you & thanks for choosing FixYa.

E1 error code : Unplug unit remove motor shroud and check the distance between the speed sensor and the flywheel and ensure that the speed sensor is properly attached to the motor frame. Check also speed sensor connections.
Unplug the electrical cord from the wall outlet and from the treadmill, wait 1 minute and turn the power switch on again. If treadmill recovers to normal operation, you may continue to use the treadmill.
Check the motor brushes either they worn or not sitting properly

F3 E1 IS THE OVEN SENSOR IT IS ON THE BACK WALL HELD IN BY TWO SCREWS IT LOOKS LIKE A ROD,MOST OF THE TIME YOU CAN PULL ITHE WIRES THROUGH OR YOU MAY HAVE TO DISCONECT FROM BEHIND

If you need further help, I’m available over the phone at https://www.6ya.com/expert/dude_653d05454b389bba

error code E1 refers to "lack of water inlet pressure" the valve the elctrically lets in the water might be at fault