How to record Outgoing Message on Answer machine of BINATONE FUSION 2210 DECT phone? Thanks

The display could be failing.

please see page 50 onwards after downloading manual from this site.
http://content.etilize.com/User-Manual/1024647012.pdf

Specify the model of your answering machine from the list beginning at
http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl/
to get the manual.

Which model phone do you have? For the CL82509 and related DECT 6.0, you need to set the outgoing message from the handset when the answering machine is on. (It can be turned on from the handset).

For the outgoing message: with the handset in Idle mode, press Menu/Select. Use the up (Dir) and down (CID) arrows to highlight Ans Sys Setup. Then press Menu/Select. Use the same arrow keys to select Announcement and press Menu/Select again. Press 7 to record a new announcement. At the tone, speak your message clearly then press 5 when you have ended the message. The message will play back.

This model's manual is available here: http://att.vtp-media.com/ecp/documents/product_Product/132/UserManual/5995/cl82509_manual_USA_i6.pdf . See page 15 to set the answering system outgoing message. (This is different than Voicemail. To set up Voicemail, you will need to see your telephone provider's documentation.)

Most AT&T phone manuals are available here: http://telephones.att.com/att/index.cfm/product-support/manuals/ .

I hope this helps.

Cindy Wells

Since you declined to specify the model of your Uniden DECT 6.0 system I can only suggest you select it from the list beginning here to download a copy of the manual.

you can download the manual from here as the Binatone website does not seem to hold user manuals http://www.exteradirect.co.uk/download/product/001310/Fusion2200__Fusion2210_UK.pdf

Hold down the asterisk key, not the hash key.

Try holding down the hash key # for a couple of seconds.
Works on the Fusion 2210

Ask here, they have already found a lot of Binatone manuals. Send them a request.

Answer machine cut off , it may related to parallel phone detection, setting. So try not parallel any other phone with the DECT phone.