Minn-kota wiring battery charger 4 bank trolling motor e-drive

Maybe this will help!?
Hope so

https://duckduckgo.com/?q=wiring+diagram+for+a+minn+Kota+weedless+wedge+trolling+motor&t=ffab&atb=v159-1&iax=images&ia=images&pn=3&iai=https%3A%2F%2Fannawiringdiagram.com%2Fwp-content%2Fuploads%2F2019%2F02%2F24-volt-trolling-motor-battery-wiring-diagram-minn-kota-24-volt-minn-kota-trolling-motor-wiring-diagram.jpg

Best to you

You can buy a (Battery Switch) that controls all your batteries. Where ever you turn the dial is what bank you will be using.
As far as The trolling motor go get a three prong plug, female male ground and stand by. The wiring is so simple it you do this.

Walld"

You can get the appropriate pins in the prop not kits sold by minn Kota or thru major retailers.
Trolling Motor Replacement Props Minn Kota Motors
You will find prop nut kits here just follow the link.

Do you remove the trolling motor wires before charging..? ...If not.. try that......mine started taking a LONG time to charge.. after I remove the trolling motor cables.. it take less time and charges better!!!

check make sure its not wired backwards to batteries

2 bank battery Minn Kota System wiring diagram Google Search

Connecting dual bank charger to 24V trolling motor General Discussion...

2 bank battery Minn Kota System wiring diagram Google Search

here you go


http://www.amazon.com/MinnKota-Trolling-Motor-Power-Center/dp/B001PTHKMG/ref=pd_bxgy_sg_img_b

http://www.amazon.com/MinnKota-MK-105P-Portable-Battery-Charger/dp/B000MN8SEK

max is 56amps on 24v system

not enough info. I went the the min kota website, they show four maxxum 80's at different voltages.is it a 12v 24v or larger? without a year model I'll have no reference to what wiring schematic Is the fuse connected inline with the trolling motor? what size amp fuse are you burning up? well I can give you some troubleshooting tips. tools to buy (1) amp gauge. if you are unfamilier with amp gauges make sure you get instruction book with gauge or you could burn yourself. Toubleshooting(1) Remove cover off minn kota trolling motor. black cover ontop of unit were the foot control wires go into.turn over foot control remove cover (2) check for corrosion. any exposed terminals should be cleaned.(3) go to your batteries and clean all connections. make sure the batteries are fully charged.(4) take amp gauge and test positive wire for amp draw as you tun on trollling motor and run it through all speeds. if batteries are in the rear away from trolling motor get a 2nd person to control trolling motor. if the trolling motor is more than a 12v system you will have more than one positive lead to test.GOAL. What your trying to find out is how many amps the trolling motor is really pulling. and at what speeds. under a load in the water and out of the water.how many more amps than the fuse raiting? newer trolling motors come with inline breakers not fuses so I'm guessing your using 30 amp fuses. again without more info i can only guess.