From the manual
2. Leave the router powered on.
3. Use a paperclip (or similar) to press and hold in the reset button for 10 seconds.
4. Remove the paperclip.
5. Wait approximately one minute for the router to restart.
The settings for the router have now been reset back to their default.
All Belkin Router's ship without an admin password. If you require an admin password then follow the below instructions.
Setup steps:
1. Open a web browser on the computer.
2. In the address bar of the web browser, type http://192.168.2.1
3. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
Image
4. Click on System Settings under Utilities on the left-hand side of the opened page.
Image
5. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
.Image
6.
Click "Apply Changes". Your new password is now active.
Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.
http://en-us-support.belkin.com/app/answers/detail/a_id/30/kw/password/r_id/166
173 views
Usually answered in minutes!
×