f-1 is flashing. I tried unplugging it for 2 minutes and re-starting as advised but that didn't help. I unplugged it for 10 minutes and that didn't help either. It didn't start flashing the code during a cycle, but just as I was trying to start a wash load.f-1 is flashing. I tried unplugging it for 2 minutes and re-starting as advised but that didn't help. I unplugged it for 10 minutes and that didn't help either. It didn't start flashing the code during a cycle, but just as I was trying to start a wash load.
Open the lower panel and look on the right side panel inside the washer. You will find a service manual telling you what the codes indicate. Our Duet does not have a F-1 code, F-H, F-2...., but no F-1
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Barbara, F1 E1 error is your washer doesn't think the drain pump is working properly.bad CCU or pump.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Sounds like a computer malfunction. The manual does not mention beeping in the trouble shooting section.
Try unplugging the machine for a minute. This may reset the computer.
What F1 means, is the you have a communication error , you need to unplug the unit for 2 mins. What might have caused this might have been a power glitch
HELLO, Error code F1 indicates a control failure and most likely the machine control board will have to be replaced. Depending on when you purchased the machine, the board may be covered under extended component warranty.
I had the same F1 problem and they had to replace the control board and something relating to the balance. The tech told me this is a common problem.
the f1 code turned into a f21 code. if you take off the front panel of the washer the manuel is in there it tells you how to reset it by pushing 4secs, releasing 4 secs for three times. To fix the F21 code unscrew the white drain after taking the front panel off and clean the drain. it will be cloged with lint, coins, bobby pins and whatever else can fit in there. LOL 10 minutes and it will be fixed like mine was, hopefully.
when the power is turned off for a period of 30 mins and then restored does the machine still display this error code as soon as you try and start the machine,o and by the way does the door lock?
f-1 is flashing. I tried unplugging it for 2 minutes and re-starting as advised but that didn't help. I unplugged it for 10 minutes and that didn't help either. It didn't start flashing the code during a cycle, but just as I was trying to start a wash load.
my washer flashes f 1. Help!!!!!!!!!
×