Ive disconnected my headset from my phone and need to know passcode in order to reconnect

Hello,
The passcode by default is: 0000
Every time you try to connect/pair your bluetooth headset with any other device (like Computer, phone, etc.) you need to enter 0000 whenever they ask.

If that's not the problem, then let me know. I'll be glad to help you out.

Please rate this solution if it helps you.

The passcode is always just "0000" without the quotes of course. Just four 0's..

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

Typically Plantronics headsets use 0000 (four zeros) for their passcode

Hello my friend,do these steps

Pairing with another Bluetooth device

By pairing your KU990 and another device,
you can set up a passcode protected
connection. This means your pairing is
more secure.
1 Check your Bluetooth is On and Visible.
You can change your visibility in the
Settings menu.
2 Touch Paired Devices then New.
3 Your KU990 will search for devices.
When the search is completed Refresh
and Add will appear on screen.
4 Choose the device you want to pair with
and enter the passcode then touch OK.
5 Your phone will then connect to the other
device, on which you should enter the
same passcode.
6 You passcode protected Bluetooth
connection is now ready.

Using a Bluetooth headset
1 Check your Bluetooth is On and Visible.
2 Follow the instructions that came with your
headset to place your headset in pairing
mode and pair your devices.
3 Touch Yes to Connect now. Your KU990
will automatically switch to Headset profile.



If you have any questions you can try reading the manual here
http://www.in.lge.com/Product/Manual/KU990.pdf

if your system knows the headset already and is set as authorised will not prompt for a passcode each time. set your system to unauthorized from your paired device list and reconnect this will force for passcode prompt.

wats the passcode for a 9xx plantronics bluethoot

it is 0000

For all current Bluetooth headsets the passkey is 0000 (four zeros).

If the phone does not accept this code, please refer to your cell phone user's guide to ensure the proper setup procedure.

Good luck from Headsets Direct!

Depending on brand of phone look for settings then connection.Under connection look for bluetooth or something similar.Under bluetooth look for setup then find or locate that is discovery mode.Now push power on button of bluetooth and hold in until a steady light is on if done correctly phone should now connect to bluetooth then enter passcode,usually 0000.

Dear lishey

Righteo, your passcode as default is 0000, all you do is try to pair your phone or bluetooth enabled device to your headset using this passkey and it should work. If not, discharge the device by simply running out the battery (leave the thing on all the time) then try to enter your new bluetooth passkey again, the headset is defaulted to only pair with one device ata time, so therefore your headset is unlikely to be bluejacked (bluetooth hacked).

If this does not prove sucessful, then please do let me know, and i will personally work with you in order to resolve this quickly for you.

You can find me here 24hrs a day 7/365 days a year, and will endeavour to resolve your technical issues for you at any time.

yours sincerely

oz