Press the Shooting Mode button (just to the left of the viewfinder, marked with overlapping rectangles) and rotate the command dial until the self-timer icon (sort of like a one-handed clock) is displayed in the control panel.
Frame the photograph and focus.
For best results, cover the viewfinder.
Press the shutter release button all the way down to start the self-timer.
You can cancel the self-timer by selecting another shooting mode, or by turning off the camera.
Custom Settings #24 lets you change the delay to 2, 5, 10, or 20 seconds.
Hi,
For capturing the images using
Self Timer, press the Down Arrow control
button continuously to select the desired mode. You can set the timer for 10
seconds and 2 seconds by pressing the continuously, If we press the button
again the Self Timer will be turned off.
Press the Shutter button, the
self-timer lamp flashes and a beep sounds until the shutter operates. To cancel
the self-timer, press the down arrow
button again. You can redice the risk of blur by using the 2-second delay
self-timer.
Good
Luck!
KenSolutions
Fixya
779 views
Usually answered in minutes!
×