HD 4651/C Electric Kettle Handle switch lights but wont heat

blinking green red light Electric Kettles Questions & Answers ...

www.fixya.com > Forum > Tags > blinking green red light

Electric Kettles blinking green red light questions and answers. Ask your blinking ...the kettle lights up but won't heat up, just bought it, the on switch shows red, but it isnot working...what to do? ... Chef's Choice 677 Cordless Electric Kettle.

red icon blinking Electric Kettles Questions & Answers - Fixya

www.fixya.com > Forum > Tags > red icon blinking

Electric Kettles red icon blinking questions and answers. Ask your red icon ... Light will not stop flashing Even after descaling and cleaning thoroughly the red lightflashes. Any ideas? ... "On" switch blinks, kettle won't heat Our 4-week old kettle juststopped working. When we ... Chef's Choice 677 Cordless Electric Kettle.

Whats very common on cordless kettles is the contacts inside the base get badly caboned up, You can fix it by opening up the base, and cleaning the three contacts with a disposable nail fie. Then re-assemble and it should be fine. If you can get at it, the ring and the center contact in the bottom of the kettle can also be cleaned with the file.

If it uses a detachable base to the kettle tank with electrical contacts, sometimes the base or kettle connector must be replaced. You will need the proper tools and wire connectors to be able to replace these parts.

Technically speaking... These are not worth servicing.

Jerry G.

It sound like the temperature sensor that switches the kettle off when it has reached the correct temperature is faulty. It would probably be cheeper to replace than repair

Hi,the element must have blown best to replace kettle

Have you tried using it on a different socket outlet ? Possibly there is a problem with the wiring at this socket.
If the electricity supply "trips" at the consumer unit it is either the RCD which trips due to e.g. the base of the kettle becoming wet or alternatively the MCB tripping due to an overload which shouldn't happen unless there is a fault in the kettle.
When you got a replacement kettle presumably they replaced the base also?

in this case i would say the element has burned out they are not a servicable unit and would be cheaper to replace than fix

best of luck.

I have a similar problem and spoke to Dualit who say that the element is probably blown. As the unit is sealed into the base it is not repairable and should be scrapped. Not really a solution more a way forward

OK, inside the unit there are three items, the heating element, thermostat, and thermal fuse.What has happened is the element got too hot and the thermal fuse opened.There is no reset button.In some cases you may run across a defective heating element or thermostat but its not common.The fix would probably be replacement of the thermostat and thermal fuse.For this, you would have to contact a small appliance repair center in your area.