Hi,
The USB jacks should just be soldered to the motheboard. How comfortable are you with using a soldering iron on a multi-layer printed circuit board that can easily be damaged if a bit too much heat or a bit too much force is applied while removing the old sockets or putting in the new ones. There is also the matter of first finding identical replacement USB jacks. You could also pay a PC repair shop to do the repair for you.
If you have an open memory card slot on the laptop, a USB adapter card like one of these may work out for you:
http://www.newegg.com/Product/Produc...82E16815123021
Just be sure you properly identify the memory/expansion slot type on the laptop and get a matching USB adapter card.
Pleaes post your feedback and Vote if the problem resolved as per your satisfaction.
If the ps2 port on the main board is broken you will need to replace the board. If this is the case and your computer has usb ports on it just go out and buy a usb mouse.
If the part that is broken is from the mouse by using tweezers try to gently remove the broken part from the board. if unsuccessful use the usb port with a usb mouse.
347 views
Usually answered in minutes!
×