CD Player wont recognise discs keeps saying insert disc.

If you are referring to a disc in the cd drive you may need to remove and try inserting it again. Be sure you don't have
it in upside down.

sounds like laser has gone but try cleaning it first if still same needs new laser

Hello, it is possible that your disc is not recognised. What happens when you try to eject - is there a manual or emergency eject button?

there is a fuse in fuse box that powers radio...sounds like a problem with radio itself....if fuse was bad it simply would do nothing"no power at all.

Hello
If it does not play the cleaner disc, just inspect whether the disc inserted in spins inside it. You can check this by open the upper cover of the player, and inserting a disc into it. If inserted disc spins inside, and the player won't read it, the fault is with its laser pickup unit, and it should be replaced with same type and number.
If the disc dos not spins, the fault is with the sled motor [the motor that spins the inserted disc], has damaged, and should be replaced. OK.

The disc is probably an incompatible format for this model player. Even if the disc is finalised in your PC, or in a DVD recorder, this player may still be unable to read it. Some DVD recorder/players do not recognise DVD+R (or +R DL) media, while others won't recognise +/-RW discs (except CD-RW); this is a model limitation - not a fault with either your player, the PC burning software or the discs themselves.

Nothing can be done to fix this except purchasing a model which accepts multimedia (+R/DVD-RAM etc). The question is, does your player play ANY normal DVDs? I am guessing your player will accept DVD-R DL discs just fine since this is standard as well as proper shop-bought movies.

Replace the optical lens assembly, it has failed.

hi, try first to insert a clean up CD, and test your Cd or Dvd player with an original CD or Dvd, if the problem persist , your laser sense is defficient you have to go to fix it to a specialist.
hope this helps you
Sserpentio

Did you finalize when you finished your recording? also try playing your new cd on your auto or home system
adolph

You can try other brands of audio cdr but it sounds like your laser is on it's way out. Some find cdrw's still work after cdr's have stopped being recognised.