Question about Jamo SUB 250 Subwoofer

2 Answers

My jamo sub 250 won't power up.... any ideas i've tried a different power lead to rule out that as a problem... no change was working fine just the other day... and is only a few years old... so not real happy if it has died.... is there a reset somewhere for it... i couldn't see one?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There is a fuse under the plug, check that first.

Posted on May 30, 2010

Testimonial: "didn't even see that fuse there... THANKS HEAPS"

Ad

Hello Guyz..

Even I'm facing similiar problem have brought a new jamo sub 250 with Jamo HCS 606 with Onkyo TXSR 608 . My SUb is not powering up either. Could you precisely tell me where is this fuse location . A Image would be very helpful.

I saw this fuse issue with Jam Sub250 in other forms as well. Is it common

Posted on Sep 02, 2010

  • Mike Hunt Nov 16, 2012

    unplug the cord from the sub in the housing take a flat head screwdriver and remove the plate in bottom of plug housing this will show the fuse

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my a102 speakers from jamo witch came


The Jamo speakers need an AV Receiver to drive them properly. The TV doesn't have the correct outputs nor does it have the power required.

The Jamo kit consists of a powered subwoofer ans 5 small surround speakers. Each surround speaker needs to be powered by the speaker output from an an AV Receiver. The subwoofer should also be connected to the receiver, but the connection is a phono/RCA lead from the receiver's "Sub Out" socket.

Your TV connects to the AV receiver via the Optical out.

Sep 01, 2014 | Audio Players & Recorders

1 Answer

I brourt a jamo sub 200 and five a102speakers but


The Jamo speakers need an AV Receiver to drive them properly. The TV doesn't have the correct outputs nor does it have the power required.

The Jamo kit consists of a powered subwoofer ans 5 small surround speakers. Each surround speaker needs to be powered by the speaker output from an an AV Receiver. The subwoofer should also be connected to the receiver, but the connection is a phono/RCA lead from the receiver's "Sub Out" socket.

Your TV connects to the AV receiver via the Optical out.

Aug 31, 2014 | Audio Players & Recorders

1 Answer

Jamo sub 250


Internal power? Check fuses. No fuses? Disassemble and check Power supply if it is internal. If it is external, check power supply with meter.;.

Apr 30, 2013 | Jamo SUB 250 Subwoofer

1 Answer

Do jamo powered subs work in the u.s.a. on 110 volts 60 hz


just buy a adaptor like a normal plug socket that your 2 pin 110 volt can plug into it then plug it in to the 3 pin 240 volt socket an bobs your uncle your sorted.

Jan 25, 2013 | Jamo A320 Hcs6 Home Theater Speaker System...

1 Answer

I have a jamo 250 sub and dont know which coax input to use


one will do just fine if you've tried one and its not working try to refer to manual on how to set up in the receiver function menus and if the sub is powered by an external amp which most are

Jul 03, 2009 | Jamo DVR-50 System

1 Answer

Jamo Sub with no power


THE IS A FUSE INSIDE THE UNIT,YOU MAY WANT TO CHECK THAT.IF IT BLOWS AGAIN WHEN TURNED ON YOU HAVE SHORTED MOSFETS. THEY ARE LIKE TRANSISTORS.

Mar 15, 2009 | Jamo SW400E Speaker

2 Answers

JAMO SUB 650


hi

since it is a powered speaker, probably it just needs a sound signal which you can get from the headphone socket. please double check with someone else.

May 26, 2008 | Jamo D 4SUB Subwoofer

1 Answer

Jamo 250


hi, there must be this LINE IN socket (ur so called Hole), then on the onkyo, there must be this sub-line out socket, plug one end of the RC socket to the sub out of onkyo , and other to the line in of the sub, its all to do wirth its appropriate inputs and outputs,let me know

Jan 11, 2008 | Jamo D 4SUB Subwoofer

Not finding what you are looking for?
Jamo SUB 250 Subwoofer Logo

1,985 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jamo Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

rjivaro

Level 2 Expert

158 Answers

Robert Rankin

Level 2 Expert

357 Answers

Are you a Jamo Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...