My Samsung Washing Machine (Diamond Drum model) problem

information here on repairing or replacing the board.

https://www.google.com/search?q=samsung+washing+machine+control+board+repair

..

mostly likely something is stuck in the pump or pump is faulty

Hello Maureen Turner,

If your model number came thru with your question... I could have looked it up AGAIN to see if

By far the biggest cause of the "suds" alarm...
is "SOME ONE" is using other than "HE" washing
agents in your HE machine...

Stop it... Read your owners manual.

This can cause serious and expensive repairs.

Troubleshooting the F35 Sud Error Code in the Whirlpool Duet Steam Washer

If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Their may be something in the line, leading to the pump restricting the flow to the pump.

from were u bought mech

inner and outer have to come out to replace berings

The amount of water in a washing machine is measured to be the optimal amount. If the clothes do not clean, perhaps you should reexamine the powder.

I NEED TO KNOW WHAT SHOULD I DO WITH MY SAMSUNG 8.0KG WA10F4 DIAMOND DRUM IF THE WATER FROM THE TUB IS NOT DRAINING..AS IF THERE'S SOMETHING STOPING THE WATER TO FLOW

It should be fine but I'm not sure how it will work with the 220v. Be sure that the power there is 110v red to white and 110v black to white. If the power is not, it probably won't work. Good luck