Miele front loader washing machine W3275- error code F53- what does this mean?

help in the link. One article says it is a $1,000 repair and if that is the case, you call for service so you get the correct diagnosis and warranty.

https://www.google.com/search?q=Miele+washing+machine+error+F53

..

Miele Washer F53 - Troubleshooting Guide

• If the F53 error code appears on your Miele washer, it signifies there is an issue with the motor that turns the drum. ...
• Try unplugging the washer from the wall, plugging it back in, and put it on sanitize.

More items...

Miele Washer F53 - Troubleshooting Guide - HowToFixit.Net

Replacing the brushes videos

https://www.google.com/search?q=Miele+W3037+replace+brushes

..

Question edited for clarity.

A Miele Washer F20 error code generally means that the drain pump filter is clogged and needs to be cleaned.

Miele Washer F20 - Troubleshooting Guide - HowToFixit.Net

Videos as well

https://www.google.com/search?q=miele+washer+error+code+f20

..

I think you press the pause/cancle button down to get rid of the error code at least temporarily.

Here is a source of user manuals. I can't use it not having your serial number: https://www.miele.co.uk/professional/user-manuals-177.htm

https://www.repairaid.co.uk/miele-washing-machine-error-codes/

https://www.appliancehelper.net/miele-washer-error-codes/

https://washingcodes.com/miele-washer-error-codes/

Thats heating error.
Defective heating element, wiring or tempsensor

Search f53 fault, has been answered previously :-)

First, unplug the washer for minutes then plug in and see if it solve the problem, if not then check the carbon brushes on the motor. These are a part which is expected to wear and when they do the motor cannot rotate the drum, which means the speed sensor thinks something is wrong and throws the error.good luck. Fixing an F53 on Miele washing machine

its not worth replacing control board just buy another machine

A call with the Miele tech helpdesk got me an answer: The tacho unit (coil) should have about 500 Ohm resistance, so they told me. My unit only had about 78 Ohm's, so I ordered a new brush unit (which includes the tacho). The new unit actually measures 250 Ohm, but since it was a new one I did fit it. It works like a charm again. No F53 fault code anymore.
The part no. is 6799642 - Module BSTV Mrt40 RK473. It cost me about 70 euro's including shipping. My machine is a type W3821, but the motor and brush unit with tacho is used on a variaty of models.
Cheers!