Wrist Watches 650 Series Sport Mans Watch 2653650085: setting time after battery change...

Email a seller of a similar watch and ask to purchase copy of instruction card.

Example:

https://www.aliexpress.com/item/Luxury-Gold-Casual-Sport-Men-Watches-Bluetooth-Light-Liquid-Crystal-Type-Display-Waterproof-S-Shock-Resist/32812467653.html




SMAEL android ios Bluetooth Smart Watch Men Waterproof Sport Wrist 1617B...

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical
support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on
"get setting instructions"

Hello,

Seiko watches are a popular accessory for both men and women. The history of Seiko watches goes back to 1881 long time ago, when the company that was to become Seiko began. From the beginning, the method to set a Seiko watch has been designed to be a simple process.

The following are the steps to set a Seiko watch for the time, day and date function, and for setting the chronograph on an analog watch.

Set the Time:

• THE CROWN

Pull the button on the side of the watch carefully, the crown, out to its most extended position. You will need to unlock the crown if your watch has a locking crown. To unlock, turn the crown counter clockwise. While the crown is pulled out in the setting position, the watch will cease functioning.

• 12 O'CLOCK POSITION

Turn the crown clockwise to move the hands of the watch past the 12 o'clock position on the dial. The day and date will change to indicate AM setting but will not change for PM setting. It is recommended that you set a Seiko watch in the morning for instant day and date setting; however,this can be done manually.

• FINISH

To finish setting the time, simply push the crown until it is flush with the side of the watch.

Good luck and thanks for using fixya.

mcdevito75 here The stem has 2 positions, we all know the 1 to pull the stem out and set the time, day, date. try this, first go thru the watches 24 hour cycle to get the month you need, now slip a fingernail just under the stem (crown) and gently lift to it"s first position, it may take a few times to get used to, when you have it turn the crown (stem) to change the date easily, change the date to 1 date before the date you want, now go thru the watches 24 hour cycle to get to the date you need. Now the watch is set and will change on time at around mid--nite.

mcdevito75 here, You can refer to the little manual that came with the watch, or, visit a small watch repair shop in your area for this adjustment, could be the battery is getting weak.

If your watch is an electronic radio controlled type , then it may be set to the wrong time zone.

Try pressing the mode button to reach the time zone setting and use other buttons to change the city.

Here you go. Bottom of page 2

For setting Time & Date...
1. Push "MODE" button three times (change Mode to TimeSet)
Time -> StopWatch -> AlarmTimeSet -> TimeSet -> Time ->...
2. Flashing Second Number Digits
3. Push "RESET" to select...
Second -> Minute -> Hour(12hr<->24hr) ->...
Date -> Month -> Day of Week -> Second -> ....(repeat)
4. Use "START" to set each item...

For setting Alarm ON/OFF
1. Push "RESET" button then Push "START" same time...
Alarm ON -> Alarm OFF -> ... (repeat)

When you are setting the hour time on your watch just press the pm key on the keyword next to the number 6. this will change to am or pm.

Hi go to www.casio.com/support under technical support choose manuals.