How do you scan 120 negs? - Canon PIXMA MP600 all-In-One InkJet Printer

Use an appropriate scanner.

you fogot to do the air bag defeat first. i bet.
pull battery, neg lug, for 15min.
then reseat all bag connectors you messed with.
put back battery neg lug and make sure it says off.
in not, get it scanned. air bad scan. at shop.

The sub works but the speakers don't? Do you hook up the speakers to the subwoofer output "loop"? This is a circuit issue when it works and stops working. I have the same issue so I wound up joining the wires that go to the sub and the wires that go to the speaker together and place those connections into the sub. The sub works, the satellite speaker works and the impedance load is no issue for my system. Confused? Simply run your neg/pos wire to the sub and where it connects to the sub, run another cable to the speaker (pos to pos., neg to neg).

The only way to repair it would be to deal with component level repair. Although I have the experience, it is too petty and it works fine the way it is.

Try using a slightly off-white background sheet behind the negative (glass-negative-sheet-scanner lid) first, or a "frame" around the negative that is anything but white... some scanners have an auto-detect feature that may be skewed for one reason or another.

Another trick, from a photographer friend, is to take saran wrap or another transparent but non-reflective material and place as a filter between the negative and glass, thus reducing glare. The sharpness may be lessened, but the glare is also lessened...

Hope this helps!

-- RT

its a lot more accurate if you have the holders, you can run into problems. you can order the part from epson or
an epson service center like us.

thanks adi

Unfortunately, you cannot use Digital ICE on B&W films due to silver particles contained within the film. The Digital ICE future only works with C-41 (negatives) and E-6 (slides) processed films, but not B&W films.

You really cannot scan a neg without a special holder. I recommend paying $90 to Costco and buying their special USB Scanner which scans one neg at atime! They are great!

Thanks,

Mark

Hi - You can download the manual by clicking the link underlined in blue below:

8800F



Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

ll you do is click on the arrow next to preview, and select normal instead of thumbnails. It took me a while to figure that out as well. Also, you will want to scan the film rightside up (opposite of what they say) and flip it in photoshop. When you scan it they way they say, the film touches the scanning bed, creating rings in your photos.