My tv turns on and of it is a rca - Proton MM2701VT 27" TV

1. Turn on the TV or device you want to use with the universal remote.
2. Press and release the TV button on the RCA Universal Remote. (The red light on the remote will begin to flash)
3. Now simultaneously press and hold the Power and TV buttons on the RCA Universal Remote. The on/off button will be illuminated and then turn off. After a moment, the button will relight, it should remain on.
4. Aim the RCA Universal Remote at the TV. Release both the on/off button and the TV button on the RCA Universal Remote simultaneously.
5. Next, press and release the Play button on the RCA remote. The TV or component should turn off after about five seconds. If there is no response, continue to press the Play button until the TV or other device you are programming turns off.
6. Now press the reverse button. If the TV or device does not turn back on, continue to hit the reverse button until it does.
7. Press the stop button once the TV has turned back on, this will save the programming settings.
8. Your RCA universal remote is now ready to use

Reciever RCA RT2500 ' Techlore

www.techlore.com/forum/thread/11889/reciever-rca-rt2500

Aug 20, 2005 - 31 posts - ‎23 authors
hey ive got the rca RT2500 home theater system. .... won't power up) regardless of number of times I try to simulate a 120 V power flash (pulling plug .... My RCA receiverturns on but there is no sound...what can this mean?

Trouble getting sound from home theatre system with my ...

www.tomsguide.com/.../trouble-sound-home-theatre-system-appreciated....

Mar 27, 2013 - TV: Sony Bravia KDL-60EX645 Home Theatre System:RCA RT2906 ...-I've set the television, per the manual's instruction, to "Audio System" and "Audio Out: Fixed." This should allow the TV to turn off its internal speakers and switch .... SolvedI have F & D home theatre system, my rear speakers won't work.

Problems connecting surround sound to LCD TV... - Forums - CNET

www.cnet.com > Forums > TVs & Home Theaters

CNETJul 30, 2006 - Hey I have a 26" LCD TV from Polaroid and a Philips DVD home theatersystem. ... the Audio setup on the tv and TELL it to output the sound via the RCAcables ... However, you would normally turn off the TV speakers with a menu ... I just can't figure out why the TV audio won't play on the surround sound. Anynet+ - Home theater won't turn on with tv
Jun 11, 2015
TV won't turn on
Jun 10, 2015
Audio Return Channel Problem
Aug 23, 2011
rca tv no sound?????
Jan 1, 2006
More results from www.cnet.com

Cut the wires off an old headphone jack and put the jack in the headphone port at the back of the tv. It should turn off the speakers on the TV.

could be condenser inside the tv have it check by a pro

Hello
Your RCA remote universal remote control model number is RCA RCU300T; I thinks and poste this solution to you.
Codes for RCA tv with this remote control are:
000, 003, 004, 005, 027, 045, 077, 089, 090, 094

In order for the 3 component universal remote to control

your TV, you must program it with the TV code that matches

your TV. These instructions explain the preferred method of
programming the remote-the Direct Entry method.

1* Manually turn on the TV.

2* Locate the enclosed TV Code List.

Find your brand of TV.

3* Press and release the TV key. The
indicator light blinks and then remains lit

4* Use the number keys to enter

the first code listed for your brand.

After you enter a valid three-digit

code, the indicator light turns off.

Note: If you enter an invalid code,

the LED will flash rapidly for 2
seconds. Start over at step 3.

5* Aim the remote at your TV and press

the ON•OFF key. If your TV turns
off, you have found the correct code

6* Enter the code in the box provided
on this page for future reference

7* If your TV doesn't turn off, repeat

steps 3-6 above, entering the next
code for your brand.
OK

RCA tv codes from the original RCA 3-in-1 universal remote.000,181,100,233,203,212,098,005,003 004,006.One of these codes program for the RCA universal remote will work.Sorry but to find the tv wright codes for the tv to work.The tv must be power on and working to find the tv wright codes to program in to turn the tv off to get the tv wright codes.Try website like Rmotes.com to buy the tv original remote,will not require tv on to used the tv original remote.

try unplugging the tv from all imputs and power and let set over night then plug everything back in.

Your RCA TV needs serious troubleshooting. Burning smell is from HV transformer or resistors smoking.

Most likely power supply and/or high voltage circuit or convergence circuit. Many times RCA have multiple or secondary faults that occur with HV or convergence failure.

Repair of RCA HV or convergence usually requires exact manufacturer parts and upgrades or repair in power supply. I would not advise trying this repair without manufacturer support for correct part numbers and service bulletins.

easyab

A shorted horizontal output transistor or shorted flyback. If the flyback is shorted replace also its HOT.

Try the POWER ON button on the top of the TV?