Will not accept the 'admin' password - Computers & Internet

Are you trying to use the admin password that comes default with the unit, or the one you were using before resetting it. After you reset the unit, the admin userid and password revert to defaults. Check the router documentation for default password info.

Most routers have the WEP or WPA2 passwords printed on the router label. If the user has changed the password good luck

there are few username and password which your router accepts
try these

Username - user
Password - user

Username - admin
Password - admin

Username - admin
Password - cciadmin

some of the D-Link Routers accept admin as the user name and admin as the password.
Try this link for several password combinations: http://www.default-password.info/d-link/

make it reset the password, that you can open the system..

if thin bios or admin password reset it all

If you reset the router to factory default and use admin and no password you should get it or sometimes admin and admin for password as well or check the manufacture website to find out what is the default user name and password for that model

Try just using admin in the password....leave the username blank.

HI, I'm assuming you have a Norstar voicemail system.
Press Feature 9 8 1, display shows: Pswd: OTHR RETRY OK, enter your old password, press OK or #, Press ADMIN or 8, display shows: Mailbox Admin, GREET PSWD QUIT, Press PSWD or 4, enter new password, press OK or # to end your password, display shows: Accept password?, Press YES or # to accept your new password, press RLS. That should do it, Let me know how it goes, ....Mike

Try Username: admin
Password: password

GL

First check that you do not have capitals lock in.Then try again the following whilst you put http://192.168.0.1. on your browser.

Default: 'username: admin password: password".
or
'username: admin password: 1234".
or
'username: admin password: 'blank empty space here'".

If all the above does not work then your router had been used, and password changed, or is fault. in this case bring it back and ask replacement.
There is also a reset button at the back of router. It is a tiny hole where you stick a pencil on router startup to get reset. But if the router is new and does not get default user/password I suggest changing it, It is possibly a return, and you do not know if you get more troubles after reset.

regards