How do i set the alarm on my sieko contura - Seiko Coutura Chronograph Watch

In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed.

2. Hold down A for about two seconds until the alarm time starts to flash. This is the setting mode.
3. Press C to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and B (-) to change it.

• When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting mode.
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
To turn an alarm and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select an alarm or the Hourly Time Signal.

• When the alarm you want or the Hourly Time Signal is displayed, press A to toggle it between on and off
• The alarm on indicator (when any alarm is on), snooze alarm indicator (when the snooze alarm is on), and the Hourly Time Signal on indicator (when the Hourly Time Signal is on) are shown on the display in all modes.

To stop the alarm
Press any button.

Set multiple alarms. If any alarm is active,(picture of alarm hear) appears in time display A. Press MODE repeatedly until ALARM appears, followed by ALM1. Press STOP/RESET to select Alarm to set. B. Press SET/RECALL to set alarm. HOURS digits will flash. Press +/- to change HOURS. C. Press NEXT and +/- to set MINUTES, AM or PM (if primary time display is in 12-hour format), DAILY, WKDAYS, WKENDS, or day of the week (weekly alarm). D. Press DONE to exit. E. Press +/- to set different Alarm. Set as above. F. In Alarm mode, press START/SPLIT to turn Alarm ON or OFF. TIP: Alarms apply to selected Time Zone of watch display. Backup Alarm sounds after 5 minutes if no button is pressed. Turning off any Alarm or backup will not affect other alarms. http://assets.timex.com/user_guides/W191_M131/W191_M131_NA_EN.pdf

try this link below
http://www.seapyramid.net/rt/seiko-qhr016slh-travel-and-alarms-clock-instruction-manual/

mcdevito75 here, You should be able to contact Sieko online, try Sieko watch.com

mcdevito75 Here, Best Bet see a small watch repair shop in your area for this band. Or you can check on ebay search, Sieko watch bands.

Go to "sieko.com", click on "support" and click on "instruction booklets" in the menu on the left.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all SEIKO watch manuals.Rate me, please

It sounds like a problem that can be solved by removing the mechanism from the case.

If the watch is within the warranty period your local dealer for that make should do it for nothing.

If it outside the warranty period, is probably best to let your local jeweler re-fix it.

check you battery!

http://www.seikowatches.com/support/ib/index.html

try this page

THanks for using Fixya
Have a nice day!