Perpetual Calendar Two Tone , SLL086 Watch for Men: sometimes when you take the stem out of a automati...

Hi isengard03,

Setting the day on your Timex analog watch is a simple process. Please follow the steps below.

Multi-Function Models

1. Pull the crown on the side of the watch case all the way out. This will be position "C," with position "A" having the crown pushed all the way in and position "B" being pulled out halfway.

2. Turn the crown clockwise until the correct day appears on the small face displaying the day.

3. Press the crown all the way in, to position "A."

Chronograph Models

1. Pull out the crown on the side of the case to position "B." This is halfway out. You will feel a slight click when the crown is in position "B."

2. Turn the crown clockwise until the watch face shows the correct day.

3. Push the crown all the way into position "A" to complete the process.

Hope it helps.

Thank you for using FixYa.

the perpetual calendar is not changeable date. you have to bring it to Timex watch expert because they know how to set it.

You have to bring it to TIMEX watch technicians because it has to be calibrated.

Try pulling the crown wheel (winder) to position 2 (1 is fully in, 3 is fully out and 2 is in the mid position).

Turn the winder anticlockwise slightly and this should move the date until it is the correct position.

mcdevito75 here, Your watch (Timex) may have a 2 position stem. Push the stem (winder) all the way in, NOW just lift the stem a little to it:s first position, this should allow the date, (number ) to change, change that number to the date before the date you want, NOW pull the stem out to set the hands, rotate the hands to set proper date and time.

mcdevito75 here, Your Jeweler had to mention your watch would go to Seiko for repairs. Seiko should notify you or your Jeweler with the repair particulars.

Go to your nearest watch center and ask them to do it for you..

GOTO
http://www.watch-clock-makers.org/
Hope this tip helps.
r/ David
http://antiqueclock.clockstop.com/

I assume that you do not have any instructions for this watch.
If you enter "www.citizen-signature.com/#/settings/" you should arrive at the page for your watch.

You can download the manual or look at sections.

I have the same problem. Watch stores are NO help. Does someone have an answer that works?