Please can you tell me how to fit a new door seal on washing machine whirlpool AWM5125 Many thanks
Usually it will be just be reversing the procedure of removing the old seal. At any rate, the door will need to be disassembled.
This link:http://whirlpool.custhelp.com/cgi-bin/wh...*i&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTQsMTQmcF9wcm9kcz0yOTMmcF9jYXRzPSZwX3B2PTEuMjkzJnBfY3Y9JnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9bGVha3M*&p_li=&p_topview=1 is for FAQs for leaking Whirlpool front loading washers on Whirlpool's Support site, you may find something there. I did see mention of checking for clogging in the dispenser drawer.
×
SOURCE: FITTING NEW DOOR SEAL ON WHIRLPOOL AWM5125
this is a complex repair and the machine complet frount has to be removed
Hi,
Thank you for contacting fixya.com.
Please check this video along
with the tutorial to install the door seal in your washing machine:-
Please get back to us if
you have further query else please accept the suggestion.
473 views
Usually answered in minutes!
Thanks, after fitting the new seal I have discovered that the leak was orignating from the dispenser draw and running down the front of the door. I have cleaned the draw and surrounding bits but the water is still leaking from under the draw any ideas please
I need help in fitting a new door seal to my Whirlpool AWM5125/5. Does anyone know how i remove the old seal and then fit the new seal. Help would be very grateful. Thanks Sherol
Hi, I have a WHIRLPOOL AWM5125 and have exactly the same problem- water leaking out of the draw - did you manage to fix your machine? if so I would be grateful for any tips on how it fixed it.
Thanks
×