Hi, I need the default base pin number for my Olympia SL-300 cordless phone, any ideas where to find it?

you just need to take the battery out and wait 30 seconds, replace it and it should be able to find the base. i had this problem and called olympia and this is the fix they gave me. It's worked for 4 years!

By default, the Master PIN is 0000. http://www.p4c.philips.com/files/c/cd2452b_05/cd2452b_05_dfu_eng.pdf

Email the vendor. That is it.

TO REGISTER A HANDSET

[At the base]

1. Press and hold the the PAGE button on the base station for at least 3 seconds. You have 90 seconds in which to register a handset.

[At the handset]

2. Press MENU and scroll to ADVANCED SET and press MENU
3. Scroll to REGISTRATION and press MENU
4. If necessary scroll to display REGIST.BASE and press MENU
5. BASE 1 2 3 4 is displayed and the registered base number is flashing.
6. Enter the number of the base you wish to register to your handset. If you have only 1 base station, press 1. If you have 2 base stations, press 1 or 2, etc.
7. When the display shows PIN---- , enter the base pin.
8. When the handset is registered to the base it is assigned a handset number.

If you have forgotten your PIN you will need to:

Reset your ORB

1. Press MENU, scroll to ADVANCED SET and press MENU
2. Scroll to RESET UNIT and press MENU
3.CONFIRM? is displayed. Press MENU
[NOTE: Entries stored in the phonebook and new answering messages are retained. You PIN will return to the Default setting 0000]

To Set the PIN

1. Press MENU and scroll to ADVANCED SET and press MENU
2. Scroll to PIN and press MENU
3. Enter the current 4 digit master PIN and press MENU. [Default setting is 0000]
4. Enter the new PIN and press MENU

Hope this has been helpful!

Rob

The default PIN for base and handsets is 0000 - if it has not been changed

• Press Menu on Handset
• Scroll to Mobile Settings - press ok
• Scroll to Local Settings - press ok
• Scroll to Chang Pin - press ok
• Enter Current handset PIN - press ok
• Enter New PIN - press ok
• Display will show Confirm - Reenter PIN - press ok

That's usually a network problem brother, contact your service provider for free customer support. It could also mean that the unit may be having problems with its signal, like your out of coverage area.

hi ther candice wanta a uniden.

Hi try using
0000 this is the default pin number

I will email you steps to restore factory default PIN...send me a note

you just need to take the battery out and wait 30 seconds, replace it and it should be able to find the base. i had this problem and called olympia and this is the fix they gave me. It's worked for 4 years!