Moyer diebel model 301HT - water does not drain out

SOURCE: Moyer Diebel Dishwasher arms are not spinning and doing lousy

Hello there
First to check is the water level is it just cover the round filter and no more, or is it much lower from the filter. It seem you have not enough water in the tank to do the washing that is why you have a lousy washing job, not enough water to spray upwards don;t talk about the top spray arm , the water doesn't reach there at all.
You can check it out by manually fill the machine with water up to the filter and start the machine up when the machine is running open the door and you can see the water spray up to the top be careful the water will spray out to your face too.
This is only to check to see the motor is running normally.
If the water level is good ( that is just touch the filter) and the problem still there, then the other cause the problem will be inside the pump motor the part call the impeller may need changing.
Do you have the manual book so I can show you which part we're talking about and let me know where your district so I can tell you where to get the parts from . My email address is [email protected] God Bless Have a nice day, Dickson

SOURCE: Moyer Diebel model DF 3- pump dispenser, the

Your sanitizer wont" go through the line , the best and the cheapest way is to change the 3 squeeze tubing together, or if you like you can change the one you know is defective. You have to know the 3 pump is working when the cycle is on. Let it run a complete cycle and you can see the pumps running or not. If the pump is not running then you may have a burned out motor in your samitizer system.

SOURCE: We have Moyer Diebel model

The drain flap/mechanism could be faulty or the hose in the back does not have a high enough loop and is siphoning back into the dishwasher.