Re: Does the tag heuer wk1113 wrist watch have a serial...
Yes. Its always under the Model Number. Some model numbers were etched, instead of stamped or engaved, on the case and over time may be worn off but on a newer watch it should be visible.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have to order the links from TAG unless you would happen to see some on EBAY but i would recommend the manufacturer. There are no generic links made for a watch like this! Tag Heuer assistance 1-866-260-0460. I hope this helps you! thank you!
Depends upon its condidion. List price that you can get on the internet ranges from 780.00 to 950.00 for a new watch. Used ones in good condition are in the 400.00 - 500.00 range. Scratches, age, or case damage will detract from that. The older ones have luminescent infill on the no. 12 character. Newer ones have a square around the date window and the no. 12 character is chrome. Older model numbers for a 2000 are stamped in the back of the case. Newer ones are etched. A "...-1" at the end of the model number is a later model. A "...-0" is a little older and no dash "-" as in WK1111 is a little older yet. Some old models exhibit common characteristic of degredation of the luminescent glow-after-dark material that is applied to the number digits and the hands. Color will look to be a mottled grey and its not uniform and it isn't as bright.
You need to pound out the adjustment link pins(s) . They are located at the ends of the band. If the watch is not too lold you can pound them out with a cut off piece of a paper clip. If it's too long it will bend when you hammer it so you will go through several of them before you finally get it out. If the band is old and the pin is stubborn you will need a very thin drift pin (tool) to push it through. Pound it through and the pin in the band will go out in front of it.
tag links can be a little more tricky. take the pin out by the buckle, on the pin is out the links come apart and are held to gether by a screw. any question just email
You will find them on ebay. A few of them are not authentic, especially the ones from asia so be sure to ask that question. Used ones are 300.00 - 500.00. Used ones approx. 150.00 for one in decent shape. The WK1113 has polished center row of links so make sure you get the right one.
×