Deleted 2 programs with Revo uninstaller Pro and now have no sound, Windows Installer won't work, Windows Management Instrumentation is blank, probably more to.

Install the program Revo Uninstaller

http://download.cnet.com/Revo-Uninstaller/3000-2096_4-10687648.html


Use it to uninstall. After the installer finishes. It will scan the computer for leftover files and delete them. It will then delete the entry from add and remove programs list.

Installation or uninstallation of an application or game fails and gives the following error code:

This issue is due to a previous installation not finishing properly

Solution 1. Rename the Installshield folder

Make sure you've enabled Show hidden files and folders.

Find and rename the Installshield folder:

Windows 32-bit: C:\Program Files\Common Files\Installshield

Windows 64-bit: C:\Program Files (x86)\Common Files\Installshield

If there is an Installshield file in the Common Files folder, rename that one also (e.g. to Installshield_OLD).

Solution 2. Remove all traces of previous uninstall

If renaming the Installshield folder had no effect, find and delete any traces of uninstalled applications.

Applications that can assist you are: Revo Uninstaller, Windows Installer Cleanup Utility , CCleaner.

Alternatively, do a manual clean-up:

Close all running programs. Then clear the Temp folder (found via input of %temp% in Start > Search or Start > Run).

Use the Windows registry editor to delete registry entries related to the program.

Restart the computer.

hope this helps

Hi and welcome to FixYa!

You have to uninstall the inbox entirely.

It should be just as easy as going in and manually deleting, but many people are finding it quite difficult to get rid of it all. It embeds itself pretty deep.



This is a free trial Please download the free version of Revo from the link below

http://www.revouninstaller.com/

Once downloaded. make sure to run the file, to install Revo.,

Revo is an uninstaller tool, that works much better then the built in windows uninstall tool. Once installed, run the revo program. Open revo, find program you want to delete, double click it, to start uninstall process, select advanced, click select and delete all files as they come up. Your program will be gone!


Hope this helps!


KittyTech

If you need further help, reach me via phone at https://www.6ya.com/expert/carolyn_427ff26936286336

Download and install Revo Uninstaller from here: http://www.revouninstaller.com/start_freeware_download.html

1. Under the Freeware column, click Download.
2. Save file and install program.
3. Open Revo Uninstaller and wait until if finds all of your installations.
4. Fine Microsoft Silverlight and select Remove.
5. Select Safe. (Make sure you have System Restore on)
6. Delete the registry entries that Revo suggests.
7. Delete the files and folders that Revo suggests.
8. Finish the uninstalling by clicking next and then clicking finish.
9. Reinstall Microsoft Silverlight.

Good luck and thanks for using FixYa.

Delete the existing Logitech software using Revo
Close all other programs while uninstalling, downloading and uploading
Download Revo - double click on Logitech - You may have more than one program installed - Use the 'Advanced' mode - Revo will make a Restore Point and then uninstall Logitech using the Logitech uninstall software.
It will then scan your C drive and Registry for all fragments and files that failed to uninstall.
Delete everything it finds
http://www.revouninstaller.com/revo_uninstaller_free_download.html
Remember that Revo uses the Logitech uninstaller initially - when it finishes LOGITECH may ask you to restart the computer - Ignore this command and let Revo do its scan - Only act on the Revo commands.
Download 'ccleaner' and run it through a couple of times,using the factory settings and the 'Run Cleaner' control until 0 bytes are seen to be cleaned following a scan
Run the 'Registry' from the left hand toolbar but 'Save' any changes before repairing
http://www.filehippo.com/download_ccleaner/
Re-start your computer

Visit the Logitech website and browse the photo gallery for your model and click on the photo to navigate to the support page.
Note - Older models on page 2 - look for the link at the bottom right of page 1 and click on it "Still can't find your product?"

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

In addition to the Logitech installer you will need to check the support software - Microsoft DirectX . This comes pre-loaded on most Windows computers but has to be updated - I am currently on version 11
To start the DirectX Diagnostic Tool, click 'Start', click 'Run', type dxdiag in the Open box, and then click OK
Run through the tabs checking the 'notes' windows for information
The version will be shown on the 'Systems' tab

Procedure to re-install Logitech software
Close all programs while uninstalling - downloading and uploading software
Disconnect your webcam
Download the Installation package from Logitech
Run the installer and choose your options during the installation - You may not want Logitech Chat but the Desktop icon for the webcam toolbar is a must.
Connect your webcam when prompted.

You need to uninstall it with revo uninstaller. You can download revo uninstaller from below link. Click here Click on above link and download revo then install it in computer. Then open revo then you can remove any software with it.Remove all reg keys when it ask for remove. Then reinstall it again. Let me know if you need further assistance. Thanks for using FixYa.

Go to www.filehippo.com download a program called "Revo Uninstaller" run the installer. All of your installed programs show up in the main window, double click on the program you want to delete. It will ask you if you're sure, Choose the advanced button and click next. Revo will initiate the programs uninstaller, if the uninstaller fails, that is ok because Revo will then take over. No matter what, do not reboot the machine until Revo is done. Once the programs uninstaller is finished, Revo will then search for any left over files and registry settings, if will be show up to two additional screens with files. Select all and delete all that is shown, when Revo is finished, you can now reboot the machine and the program will be gone.

try the followings:
1.go to bios and set the default settings
2.reinstal the windows by formating the drive.
3.should work fine.

Go to www.download.com put in Revo uninstaller in the search box. select the program for download and download it. Run the program. The window will come up and show all installations on the computer. Pick the program you want to get rid of. select program and click uninstall in the header, the program will initiate the programs own self installer first, when it is done or if it fails, Revo will continue with the uninstall. Make sure to choose option (4) when prompted with the type of removal you need. if prompted to restart windows after the uninstall, ignore and continue with the Revo program. Click next when it is highlighted by Revo and select all when prompted to delete files. Revo will prompt you when it has finished, just say yes to all files to delete.

Solution 1 :

go to control panel
click to administrative tools
double click services
find service related to CA and Stop it.

now try to reinstall ca.

Solution 2:

Download small program called "REVO uninstaller" and run it and then try uninstall this CA from that Revo.

Solution 3 :


go to "c:\program files\ CA" folder delete it. before deleting from the system tray exit from CA
then got RUN in Start menu.
In RUN type regedit

registry editor will open the try to find for CA and delete all keys in registry related to CA
Restart computer.

then try to reinstall CA.