This TV when power on it show picture but goes blank after 30 seconds and will give sound with no picture. The lid light will remain green but screen is blank, no picture but it has sound.
Thanks
Posting what worked for me:
I had this problem on my 42" Philips. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.
The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.
My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.
Hope this helps, may not apply to your situation.
Same problem.
498 views
Usually answered in minutes!
Having the same problem, will watch with interest
same here
Screen goes black but audio continues?!
×