Emachine 786n mointor frozen emachine logo

If your MC3300 scanner is frozen on a white background with a blue Motorola symbol and says MC33X series, you can try a soft reset to see if that resolves the issue. To do this, follow these steps:

1. Hold down the power button until the scanner turns off.
2. Wait a few seconds, then press the power button again to turn the scanner back on.

If the scanner is still frozen after attempting a soft reset, you may need to perform a factory reset. Please note that performing a factory reset will erase all data on the device and return it to its default settings. To perform a factory reset on the MC3300 scanner, follow these steps:

1. Press and hold the power button and the volume down button simultaneously.
2. Keep holding both buttons until the scanner vibrates and the Motorola logo appears.
3. Release both buttons.
4. Use the volume buttons to navigate to the "Factory Reset" option, and then press the power button to select it.
5. Confirm that you want to perform a factory reset by selecting "Yes" using the volume buttons and pressing the power button to confirm.
6. Wait for the scanner to reset and restart. This may take a few minutes.

If a factory reset does not resolve the issue, you may need to contact Motorola's customer support for further assistance.

If you are not booting from a network, PXE-boot is the wrong boot option.

You have to change the boot order so that the PC will boot from your HDD. This can be set in the boot option in your BIOS.

Depending on the type of BIOS, you will enter F2 or Delete during the POST( when the white letters appear on the screen after you turned it on). This will enter you into the BIOS setup. boot options are usaully the last tab. Either disable the PXE-boot or change the priority so that it boots from the HDD first. Please, if you are unformiliar with this, reference the manual or ask someone with some IT background.

If the problem still exists after you configured the boot options your hard disk drive might not be readable. The BIOS just goes to the next availible boot device.

The only option is to try another restore. If that still won't work you need to contact apple.

Hi bob,

Usually system stops at the startup screen or the startup logo, when it finds some fault in detecting the IDE drives(ie,your harddisk or cd drive), if you dint get any get stuck in the logo, you have to see what happens at the background by clicking on f1 key or f12 or TAB or some key to show the activity rather than logo.....

After seeing the error we can conclude or decide about the problem, but when you were not able to see the screen after pressing any key as specified in your manual, Or it hangs after the LOGO screen, this must be problem with your harddrive, try changing the harddish or try connecting once again by removing it...


Enjoy Rate!


RNJ VINOD KUMAR

try this reinstall ur windows from ur emachine recovery cd and this should help let me know if it does

Per the first Google result for "reset ipod touch", http://www.mydigitallife.info/2007/10/04/how-to-reset-iphone-and-ipod-touch-hard-reset-or-reboot/ says:

"Press and hold down the Sleep/Wake button and the Home button simultaneously at the same time for at least ten seconds, then the LCD display will clear and the Apple logo appears on the black background. When Apple logo appears, reset is done"

try to remove the battery and wait for 2 mins and then restart the phone if it doesn't work send it to nokia assuming it has a valid warranty!

if its an inkblot you broke your screen..... the same thing happened to mine and i'm still trying to find a place to repair the screen.... if i find anything i'll tell you

I feel your pain. I finally moved my pc to a room with no windows! But seriously, try a different monitor first. See if you can borrow someone's to just try it before you do anything else. If that borrowed monitor works fine, then you know what the problem is. (Which I believe is the problem.) By the way, what started all of your problems?

Have you tried a new lamp?