Roady XT XM Radio Receiver: how do I change the radio station i want my xm to ...

If you're using XM Direct to input channels, press the select key after tuning to the channel. If you're not, perform a factory reset. The squealing noise is because of interference with your speakers, it's normal (unless you don't hear any music).

Here is a link where you can download a user manual for free that may give you the info that you need to reboot/ rset it. Let me know if you need any further assistance.

yes. Just plug in the antenna from the XT base into the Onyx base, plug in power and activate!

Tune in 88.7 fm

Did you try reseating it in the cradle? Check the connections to the cable too

Go to refresh.xmradio.com and insert your radio ID and click submit, it will send a refreshed activation signal to your radio and you should have your channels back within about 15-20 minutes

You need to replace the transformer that plugs into the wall.

mine does the same thing.

Mine is doing the same as well. Been working for 1 year. Now it starts cutting out while listening. I noticed if it is broadcasting the fm frequency menu is there. The minute it cuts out I press Menu and that menu item is gone. It comes back once the radio starts working again. Mine is 1 year old. I got it Christmas of 2006. I do know that if you have it directly connected then this menu item will not appear and that is by design. I think my xm roady xt has gone bad.

Chances are it's not picking up the XM signal. First, contact XM to resend your setup. if that doesn't work check your antenna connections.