358.791070 filters for Craftsman weed wacker

• To fix a weed eater that won't start, check the fuel to ensure that you are using the correct gas-to-oil ratio for the weed eater. Then, you have to change the spark plug. After that, replace the fuel filter. Now, you need to review the starting process of the weed eater.

You will need the model number.

https://www.google.com/search?q=craftsman+weed+Wacker+need+piston+rings

..

#34 craftsman weed wacker manual

45.55.157.141/craftsman-weed-wacker-manual.html
100+ items - pdf download about #34 craftsman weed wacker manual ... Books Title
File Code
Craftsman Weedwacker Manual from Sears com
Free Craftsman Trimmer User Manuals ManualsOnline com

If you go to searsparts.com and put in your model number it will show you a drawing of your weed wacker. Not sure of what you are looking for. Hope this helps.

Replace head gear box.

Hi pmbaugardne...
Please take time to rate me

it could still have the broken peice from the old one inside the seat.take it apart and look inside and inspect the seat where the drive cable enters.

http://www.craftsmanlawn.com/WeedWacker_Weed-Trimmer/358.795310/

Go to VIEW MANUAL. Then the process you seek is on PAGE 10.

This can be a little tricky, the filter is in the tank connected to the line. The line is pulled through a hole in the tank which seals only because the line is the correct outter diameter to seal the hole and not collapse the interior. Fuel line and filters are available at most places that carry outdoor power equipment parts but you must make sure the line is the exact size inner and outter as the original.
If the trimmer has a primer bulb the line goes from the tank to the bulb and then to the carburetor, a second line goes from the carburetor back to the tank, don't get them mixed up.