Blue-red-pink lines over screen and BIOS

Sound like your Y-Sustain board has one foot in the grave. The Y upper buffer and Y lower buffer boards go when the Y Sus Goes too...

Sounds like the gel has dribbled down into the workings and has effected the circuitry. Time for a new monitor. More importantly, why the heck were you using a liquid/gel sanitiser on electrical equipment. Use dedicated screen wipes

Hi gailandst632,

I saw you post stating that you have pink spots/dots on your Screen.

to determine what the problem is we weill need to turn your computer off and boot into the BIOS screen.

1. Turn your Computer Off, then as soon as you power the machine On keep on tapping F1 on the keyboard to get the BIOS screen it will be a Blue screen with white fonts on it, in that screen see if the pinks dots are present or not.

2. If the pink dots are present in BIO then that means that the LCD screen of your Laptop needs to be replaced.

3. You will need to call your manufacturer regarding this concern check if your system is still in warranty, because this will be very expensive if you are out of warranty.

4. All manufacturers will cover a pixelated LCD screen if the dots or pixelated area has at-least 5 or more dots/pixelated areas on the LCD screen.

I hope that his will help you with the concern that you have posted.

Have a nice day.

Yaps those are because of magnetic feilds around the monitors and TVs, try moving it to a safer place.

if you take the back cover off the tv, you will see in a white screw in almost every board, those are called pot. (potentiometer).
if you can get to meter the Ve. Vs. and Vset. start to screw or unscrew those white screw according to what the label says.
usually the ones who gives you the blue and red dots are the white screw on the right of the center panel, and the one on the right of the right panel right under the metal thing to hang on the wall.

The vertical line is a bad pixel sensor at the edge of the screen, your screen has hundreds of vertical and horizonal pixel sensors. This is an indicator that the screen is going out and need replacing.

Hi, check the lense. It might be dirty or you may have left the lense cover down.

hope this helps,
Eric

My Lcd monitor has blue line? How can I solve this problem?

use menu and h/v then change then move to higher level and it will take it away.

it's called retrace lines ,your screens are set to high or focus block assy which has the screen adjustments on it also is faulty