My remote quit working.

0081 0216 0217 0157

Hello
Get into this link. You can see how a direct tV remote should be synchronised. OK
ehow.com

Don't know if the 26" is the same as the 32, but 10019 works for the 32".

call directv and they will walk ya thru reporgramming remote for reciever. or goto menu, setup, remote, then follow on screen instructions. i cant give u the exact instructions cause every reciever is a bit different and its different if one remote operates two directv recievers. ( like a bar would do to operate two tvs with one remote)

Here is a copy of the manual if you don't have one

Remote control programming starts on pg 76-78

If the tv isn't listed on the on screen controls, you might want to check with Direct TV on getting hold of another remote that can be programmed. Sometimes software update are done to the tuners as well but usually there never done for adding new models to TVs.

One thing I never liked about Direc TV was I always had to update the TV tuners every two years because of new features.

1.Press menu on your remote and then go to settings and press select on setup.

2.Go to remote and then go to reset remote.

3.Press and hold MUTE and SELECT until the light above the mode on tv switch on the remote flashes twice.

4.Enter the code using the numbers on your tv.

5.you have cleared AV1,AV2 and tv modes.Move the switch back to DIRECTV;press select on done.

Hold power button on while pushing mode;do this at the same time. Continue doing this until TV mode stays on. It worked for me!

Cheers