I tried installing the fly fusion but the CD wont load up

Remove battery -ve cable for 10 to 15 min then refix it and on ing switch press eject knob on unit. i think it will work

Try leaving it hooked up to the computer for a while then after maybe a few hours try to turn it on again.

I posted the link for documentation responding rather than answer a dozen other posts with related requests.

I'm fine with giving answers for people, but do I have to pay FixYa after 30 days for the privilege of doing so?

Best, Mark

It is on the Seagate site. In the search box type in Maxtor Fusion, it will take you to what you need.

Anti-theft on radio. Should be a code on a card in owners manual.

If you use it but don't use all the money it will take the remainder off.

If you go to the LeapFrog Website and at the bottom select customer support you can then select the fly fusion.  The guide you are looking for is entitled "Fly Fusion Parent Guide" I know it's not named the way it should as it is a general guide and not just about account administration.
http://www.leapfrog.com/etc/medialib/leapfrog/fly/ffls_37735.Par.40053.File.dat//Users/na/Desktop/Parent%20Guides/FFLS_37735_PG.pdf

no the on in the link is a fly pen 1.0 the one where you have a usb on the top is the fly pen 2.0

just leave it hooked to the comp for a while. than le it hooked an turn it on. wait till the compu loads

I just had this same problem, and the Fly Fusion website has this to offer (the website link is http://fly.custhelp.com/cgi-bin/fly.cfg/php/enduser/std_adp.php?p_faqid=1619&p_created=1201901554&p_sid=fj7lBboj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPSZwX3NvcnRfYnk9JnBfZ3JpZHNvcnQ9JnBfcm93X2NudD04NSw4NSZwX3Byb2RzPSZwX2NhdHM9JnBfcHY9JnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTE*&p_li=&p_topview=1 or you can go to Fly Fusion supprot link and click on the FAQ section to access this information):

Question Unable to install FLY World on Vista Answer If you are unable to install FLY World on the Vista operating system, please follow these instructions.

1. In windows explorer navigate to c:\windows\system32

2. Find the application named "cmd". Now right click on "cmd" and select "Run as Administrator"

3. In the following window, type or copy and paste

regsvr32 /u vbscript.dll

Now press enter. You may receive a pop-up regarding DllUnregisterServer that it succeeded or failed. In either case, click OK.

4. Next type or copy and paste

regsvr32 /u jscript.dll

Now press enter. You may receive the same pop-ups regarding the DllUnregisterServer message. Click OK once more.

5. We will next need to type or copy and paste

regsvr32 vbscript.dll

and press enter. You may once again receive the pop-up window. Simply click OK to continue.

6. Finally, type or copy and paste

regsvr32 jscript.dll

and press enter. You may once again receive the pop-up window. Simply click OK to continue.

7. Try running the installer again.