Need an drawing showing hou to connect yamaha rx-

Sony Bravia TV kdl- red blinking led light error codes ...

? 10:28
https://www.youtube.com/watch?v=0KGysXbxnaU
Mar 28, 2015 - Uploaded by Tampatec
Sony Bravia LCD TV KDL models red blinking led light error codes & possible ... with perfect picture, no warning signs and it just shuts off. is it that quick? ... with the following problem: I connect the power grid lights Standby red light. ... the title before deleting, it is very fast after that flashes Standby 6 times.Missing: 46w3000 ‎30

I would check the menu settings and reset everything to default. if there are calibration tests in the menu, use them. Try more than one source for video.

yotampoco lo seeee!!!! jajajajaja!!

all you need is one set of the red and white rca cables.your tv should have an audio output with a red and white hole.plug in red and white wires to those holes at the back or side of your tv.plug the other end to your auxilary red and white holes at the back of the stereo....if your stereo doesnt have aux holes then you can plug into L.d.,VIDEO outputs at back of stereo.you then turn your select button,nob on your stereo to either the aux,ld or video.hope this helps

Go to www.sonystyle.com to register

I tried out a few of the numbers that were posted and the "0000" number worked.

Thanks anyway

You can download the user manul here, it will show you how to connect the DVD to the TV.
http://tv.manualsonline.com/search.html?q=Sony+BRAVIA+KDL-40S2010+&submit.x=34&submit.y=13

Connect Xbox via HDMI to DTV/IN, Connect HDMI from out to Sony Bavia's HDMI/IN. Connect TV's Optical out to amps DTV/Optical in.

2X HDMI cables and one Optical are required.

Enjoy great sound :)

OH: choose the DTV input then stereo and then dolby 5.1 etc .. cheers

Your description is not entirely clear, so I have to guess a little here, but I think what is happening is as follows:

1) You are using your DVD player as the source for the CD.
2) Your DVD is connected directly to the TV and the TV then connected to your receiver.

If the above are correct, then the problem is that the TV only has what is called an ACTIVE passthru for Audio signals. This means that the signal is process by the TV and tehn sent to the audio output jacks. With the TV off, the buffer ICs are not functioning, thus no output. Some older sets have what is called PASSIVE passthru.

I don't know your specific DVD model specs, so check to see if you have 2 audio outputs from the DVD (many do) and connect the other audio out directly to the receiver. That will resolve your problem.

Dan

I have the sony KDL 46 EX720 and got the code 2751 to work.