How do I program Osiris MX-350 to AT&T Uverse cable box? Learn mode did not work, nor did code 100 or 180

056,052,057,098,099 are the codes to check. If you wish to get more, check these sites. http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

HI Julia,
I have a link for you regarding your issue programming your other remote to your att STB. Hope it helps
Search Results for program other remote to my uverse

Type this address into your "address bar" (long white bar on top of the internet explorer page)

www.universalremote.com/resources/pdfs/MX-350OwnerManual.pdf

Vizio Television 1343, 1018, 1004, 0178, 0502, 0627, 1756, 1758, 0128, 0117, 1017, 1078, 0030, 0056 VIZIO HDTV 1004
If your tv is HD mute wont work.

This is for programming the uverse remote to the vizo tv. From my understanding the uverse box doesn't have a code.

Besides the many features Osiris MX-350 provides as a universal remote control, it is also a learning remote.

If pushing the button doesn't have the expected result, e.g. pushing the GUIDE button on the remote doesn't bring up the channel guide, you can teach the Osiris with the original remote.

Instructions on teaching your remote a new command is included in the instruction manual.

Since I couldn't find a code for my Sony blu-ray player, I just taught the Osiris all the commands from my original remote in about 10 minutes.

Most remote makers provide information and codes for programming their devices on their websites. check there for the instructions.

Do an automatic search for your code.

1. Turn on the device you wish to program
2. Point the remote control at the device
3. Press and hold the mode key (i.e. tv, dvd or aux) you want to program
4. Without releasing the selected mode key, press and hold the OK key simultaneously
5. Release both the mode key and the OK key -All the modes keys will flash twice indicating programming mode
6. Enter 922 by pressing the number keys on the remote control -The selected mode key will flash twice indicating correct entry (for anything other than AUX go to step 7, for the AUX mode searching only, press and release the play key then press 1 for VCR 2 for Receiver/Tuner 3 for Amplifier or 4 for Home Theater In The Box (HTIB) - The AUX mode keys will flash twice indicating correct entry)
7. Press and release the PLAY key, every time you do this, autoserach will try a different code, continue to do this until your device turns off. (if you weren't paying attention and you miss it, the REW key can be used to go back through the codes one at a time, and the ff key can be utilized to move forward through the codes one at a time.)
   
8. To save the code press the ENTER key (below the number 9) then press the exit to return to normal operations. (the selected mode key should flash three times
9. Turn you device on by selecting the appropriate mode and power.
   

You can call the company and give them the model number MX-350 and they sell for around $4.00 a piece. I bought 2 in case I lost another one.

Call Osiris Universal remote @ 914-835-4484 or e-mail to [email protected]


Hope this helps,

Webb

Code for gateway works. I used 206 on my universal remote. I have a Phillips remote.