No response when i press play

go to the "Start" menu and "Control Panel" and click on "Device Manager. Proceed to "Imaging Devices" and "HP Webcam."Click on the "Driver" tab. Update the driver. Click "Search Automatically" for updated driver software.Open "Quick Play" and click on the music, video and picture icon on the bottom of the screen.Under "Source" click "USB Video Device." Your webcam should be activated. Press the red button on the bottom of the screen to record video. Press it once more to stop. Click on the camera icon to take a snap shot image.Go to "Public," "Public Videos" and "HP Webcam" to view your videos. Go to "Public," and "Public Pictures" to view your pictures.

Hi,

Go to the "Start" menu and "Control Panel" and click on "Device Manager. Proceed to "Imaging Devices" and "HP Webcam."

Click on the "Driver" tab. Update the driver. Click "Search Automatically" for updated driver software.

Open "Quick Play" and click on the music, video and picture icon on the bottom of the screen.

Under "Source" click "USB Video Device." Your webcam should be activated. Press the red button on the bottom of the screen to record video. Press it once more to stop. Click on the camera icon to take a snap shot image.

Go to "Public," "Public Videos" and "HP Webcam" to view your videos. Go to "Public," and "Public Pictures" to view your pictures.

Thanks,
Bhautesh.

It will be somewhere in you play back settings.

Assume you have Sony DCR-HC20 camcorder and it does not show you live view to record, I hope camcorder is playing back old recorded tapes perfectly with good quality picture on its LCD.
If it is true then your camcorder has ccd imager chip failure and ccd imager needs to be replace to get live view in LCD monitor.
Qualified camera tech will replace ccd imager chip.
Thanks.

Hi,
Your camcorder Sony DCR-HC20E has bad ccd imager problem and that part will be replaced to have live view to record on tape.
I can provide you ccd imager part number info if you want to repair it by yourself.
CCD Imager replacement in this camcorder requires expertise and fair skills of soldering parts in PCB.

Press RECORD/PLAY Button to switch from Record Mode to Playback Mode.
The Playback Mode is for viewing and managing movies and pictures as well as listening to voice and
music on the built-in memory or on an optional memory card.

Operation Display Screen
Press RECORD/PLAY Button ( ) to switch
from Record Mode to Playback Mode Main Menu.
• There are 4 options in the Playback Mode, movie,
picture, music and voice.
• Direction Buttons can be used to select the
specific option.
• Press OK Button to view movies/pictures, listen to
voice or music.

Playing Back Movie Clips
You can play back the recorded movie clips on the LCD monitor screen. However, the
sound recorded with movie clips can only be played back on a computer.
1. Press the button.
2. Use the four-way controller (����) to go
through the images until the movie clip you
want to play back is displayed.
�� To view the previous image, press the
four-way controller (��).
�� To view the next image, press the
four-way controller (��).
3. Press the button to start playing back
the movie clips.
�� To pause or resume movie playback, press the button again.

does this camera have a round keypad on the back? if so when you go to look at your pictures push the button up, or ,down, left or right. on my sony I push the round menu pad up while looking at pics and that displays all the pics

The filename (e.g. DSC0012.jpg) shows the image number, the filespec shows the date and time recorded. Most software will give you document info about resolution of the image. I wouldn't worry about what the battery status was when the shot was taken or how many other images were on the Mstick. I guess I'm not sure what you need.

Recording Still images To The Memory Stick M.REC mode (Memory RECORD mode) 1. Set the mode switch to MEMORY CARD. 2. Set the power switch to CAMERA. 3. Press the PHOTO button. The still image is recorded to the Memory Card. To View photos on the Memory Card M.PLAY mode (Memory PLAYBACK mode) 1. Set the mode switch to MEMORY CARD. 2. Set the power switch to PLAYER. The last recorded image appears. If there are no recorded images on the Memory Card, NO STORED PHOTO! or NO STORED MPEG4! will display on the screen. 3. Using the (FWD) and (REV) buttons, search for the desired still image. * To view the next image : press the (FWD) button. * To view the previous image : press the (REV) button. * Pressing (FWD) when you are on the last image will take you to the first image and pressing (REV) when you are on the first image will take you to the last image. * Keep pressing (FWD) or (REV) to search for an image quickly.