I need code to operate one for all URC 3445 on Samsung VR350m

I doubt it exists. (a workable code).

Codes to check are: 0354 0358 0240 0369 0455 0942 0963 0230 0337
Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

You can get the manual and codes on the link below.

http://www.oneforall.com/uploads/support/2c295be6404e14dc9fcedf25f0195bb8.pdf

Hi. Yes here is the support site -
http://www.oneforall.com/en_UK/support

HTH
Chas

If you mean an Emerson TV/VCR combination, try Emerson 0479 1479 1278 .

For the Zenith VCR VR4225HF: Zenith 0039 0033 0000 0209 1479 0479

Emerson VCRs use the codes: 0037 0184 0000 0121 0043 0209 0278 0479 1479 1278
Emerson TVs use the codes: 0154 0236 0463 0180 0178 0171 0623
For additional codes see: http://oneforall-na.com/remote.php?type=URC%203021 .

However, the codes are limited to devices released at least 6 months before the remote was programmed. If your devices are newer, you need a newer remote.

I hope this helps.

Cindy Wells

http://tv.manualsonline.com/ex/thread/view/idThread/2155727

not all universal controls work with all brands and makes.....some have a decode code inside and u can enter this code to work with ur remote.....
if not u just have to do it Manuel

mantha85

What sort of "recognization" is your TV showing? Do you get a blue screen but no AV?...accordianman