Spinning cycle My LG TROMM WM2277HW leaves soapy water in clothing after stopping spin cycle prematurely leaving clothing soapy and wet. It reads OE. We opened the filter at the bottom of the machine, drained the water and cleaned outt he filter (which was already clean) and restarted the load. still continues to do the same. washer wont spin after wash

Keeping in mind that the soap & bleach gets dispensed into your wash on the second to last rinse cycle and that most all rinse cycles are in cold water. Is your cold water valve screen plugged causing your washer to rinse poorly? Are you using the HE detergent? If not maybe the washer is sudsing up to much and having a hard time rinsing all the suds and bleach out and leaving the clothes soapy.

Fill the washer up with no clothes in it on a cold/cold wash setting does it take a long time to fill the washer up? Also when it is full and agitating is there suds in the washer?

Last suggestion is if the drain is hose is a lot higher than the top of the washer it might have a hard time draining out all of the soap water before the next load