How do I change the door gasket on a Whirlpool Duet washing machine model WFW8300SW03 I have the new part

See if this helps:
http://www.ehow.com/how_7836303_troubleshoot-whirlpool-duet-ghw9150p.html

try unplugging and plugging back in. a reboot of sorts.

i am not a repair man, but I own one too. good luck.

There is also a safety switch on the bottom compartment, if the cover is off it will display F28.

Door Gasket replacement video guide

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

http://homeguides.sfgate.com/change-door-gasket-whirlpool-washer-model-ghw9150pwo-81678.html

ya if it dont leak if it does shut it off

This is not to my credit, but I found it on Fix-it--


here is an online manual ,as txt url wraps around you may have to copy paste it .

http://adcxns1.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/eab852a13fbc842085256aa200643dd6/$FILE/Duet%20Job%20Aid.pdf

The following link explains step-by-step how to replace the door gasket (bellow) on a Whirpool Duet:

http://www.fixya.com/support/r385211-replacing_door_bellow_whirlpool_duet

If you have any questions about this repair, or require additional assistance, please let me know. I hope this helps you.

The following link explains, step-by step, how to replace the door bellow on a Whirlpool Duet:

http://www.fixya.com/support/r385211-replacing_door_bellow_whirlpool_duet

If you have questions about this repair, or require additional assistance, please let me know. I hope this helps you.

you might have a bent door hinge, but most likely you have a worn door boot. its the grey rubber thing that the glass seals to.
try to lift up on the door to get the hinges back into place and if that doesnt work then you might need to replace the door boot.
look at the edge of the boot where the glass hits it. the glass must seal to the rubber and if the rubber is worn or torn then it wont seal.
not an easy piece to replace but it can be done. i wouldnt recommend trying it first as you will find it very tight to get your hands into and the clamps are hard to figure out as well.