Getting netflix activation code insignia ns-brdvd2

The NS-RC02A-12 is a remote control that shipped with several Insignia TVs. Since one of the TVs that came with this remote is the NS-39L240A13 which does not have wi-fi or an ethernet connection port, I suspect that none of these TVs are Smart TVs. See https://www.insigniaproducts.com/pdp/NS-39L240A13/5061732 for the specifications.

You can make it a Smart TV and get Netflix by adding a Roku, Fire Stick or other streaming TV stick or box to one of the HDMI ports. If you have the ports occupied, you'll need some sort of HDMI switch device to share the input.

I hope this helps.

Cindy Wells

Can you get anything else through that HDMI port?

Chances as it got burned.

Go to the settings menu of the Insignia, click on "Reset" settings and then select "Deactivate Netflix".
Next, restart the player and access the Netflix once again to reactivate it.

There are two ways to view netflix either browser or using the netflix app. Both use the same system og login and password. You will have to contact netflix support to get help with that. Either way will use the same account login details. They are pretty quick on the job for helping out with these things.

Insignia - 143

Here is your manual:
http://www.universalremote.com/resources/pdfs/wr7_manual.pdf

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

possible model specific glitch perhaps it may be fixed by a patch-update later on

I'm sorry to tell you this, but the BDLive01 was not designed to connect to Netflix.

Netflix streaming was not possible on the Insignia BluRay players until the NS-BRDVD3.

Again, I am sorry to be the bearer of bad news.

To stream Netflix content you will need to have a computer connected to the internet and a netflix account (even the lowest level should allow you access).

Set your NS-WBRDVD to connect to your wireless network.

Start up Netflix and select you are a new user. You will be given an activation code.

On your computer, log-in to the Netflix website: www.netflix.com On the top right of the screen you should see "Your Account & Help" Click that.

On the "Your Account & Help" screen, in the Account Information section on the bottom right of that grayed box should be "Add Blu-Ray". Click that and you should be prompted to enter the code your NS-WBRDVD gave you.

Once you enter the code and Netflix accepts it, your player should confirm and allow you to watch Netflix streaming content.

Hope this helps!

This model player (NS-BRDVD) is not Netflix capable. Netflix capable models are NS-BRDVD3, NS-WBRDVD, and home theater system NS-BRHTIB.

This model, NS-BRDVD, is not Netflix capable. Models NS-BRDVD3, NS-WBRDVD, and NS-BRHTIB are, however. A firmware update may be required when first setting up your player for best functionality.