Cannot get the tv into 'video1' (or ' video2') mode

I would connect to your tv because you should be able to select what input you want to use from there. I.E. HDMI1, HDMI2, Video1, Video2, etc etc

close the pip window first
if your tv/video button on your remote brings up
an input selection menu either press the number
of the ones you want or use the chan^chanv buttons
to select

Try changes the input on your TV. You will need the TV remote that came with your TV, or a universal remote that has been configured to work with your TV. Find a button on your remote that reads "Source" or "Input". This will cycle through the sources and inputs of your TV including AUX, VIDEO1, VIDEO2, etc.

If your TV is only black and white while playing on the Wii, this is indicative of a problem with either the A/V cable or the A/V ports on your television.
If you have a friend who owns a Wii, try using their cable, or change the A/V jacks to a different set of ports on your television.
NOTE: The A/V jacks are the red, white, and yellow plugs that plugs into your Wii on one end and into your TV on the other. If, for example, these jacks are under VIDEO1 on your TV and you switch the viewing mode to VIDEO1 to play Wii, then try moving them to a set of A/V plugs under VIDEO2. If this is an older TV, there may be only one set of plugs on the TV itself. Try the console on a different TV. It may be time to get a new television. This often happens on older TV's.

on remote should be under video,,or input,,,on front of tv ,,i think input,,,or source,,it will come up 2 video1,,,video2 and so on

During a recent move the remote was lost. I have the 6420FF in my son's room and trying to set up dvd and wi console set up, but cannot adjust tv via menu button on tv. Is there any way to set-up game system and/or dvd without remote?

These are the codes printed in the owners manual for your dvd/vcr player.If they do not work you will have to contact Emerson and ask them for help getting the code. The contact number should have come with the instructions for the remote. Just give them the model number of you remote and the units model number and they should be able to help you. I hope this information helps you with your problem. Switch the input selector on your TV to an appropriate external input channel (usually near channel 0).
Press a button on the TV’s original remote control that selects an external input channel until the DVD
recorder’s picture appears. Check your TV owner’s manual for details.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO 1, VIDEO 2, VIDEO 3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands (Example)
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00

Yes!
When you define different activities (such as Watch TV, Watch DVD, etc.) the remote will ask which of the TV inputs your device is plugged into.  After programming, when you select the appropriate activity, the remote will automatically select the correct input.

HI:Leeray53
THE MEMORY EEPROM WILL BE CHANGED
PROBABILITY IS DAMAGE,
THAT RESET TO DO IT MODE ORIGINAL


FROM LUIS

You have to choose the right INPUT on your TV where your DVD player was connected. If your using the Yellow/Red/White cable from your DVD player you need to choose on your TV the input Example Video1 Video2, etc... If your using the COAX,(like cable wire) Put your TV on Channel 3 or 4. Hope this may help you. Please post the outcome, if you need further help. Is this TV is a COMBO?