At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: My WS-55311 in pluged in and no power at all - no...
Looks like u have a bad switch at the control panel . what u can do is take the fron speakers grill off and unpluge the front panel and turn u tv on with the remote control it should work
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When the power
light comes on and goes off, on the front of the set press BOTH the
Menu and Input (Device) buttons at the SAME time and HOLD them both for
at least five seconds and then release both.
The power light
will blink a two digit error code and will repeat it about 5 times. To
get it to repeat you would have to unplug the set and turn it on again
etc.
The most common error is 2 blinks, pause, 2 blinks.
Let me know what error code you find and I will direct you as to what it means and what may have to be done.
The convergence ICs have failed and thats what is shutting the set down. You will need to replace both convergence ICs they are STK394-250 you can get replacement ICs at the following link with free shipping and free instalation instructions with pictures s you can do the repair yourself. Here is the link. http://servicemanuals.vstore.ca/
You might have a bad power supply or convergence circuit, I also suggest you to check for fluid spill on the circuit board. if the convergence is defective one of the 5A picofues on the power supply is open. Hope this help you.
×