Geneve gold wrist watch

The watch would have to go back to the manufacture, try www.timex.com for customer support and ask for technical assistance, they should be able to direct you to the nearest authorized store or they may have you send it to them.

mcdevito75 here, Battery usually lasts 1 year and longer, even if you did change the battery yourself now, you"d forget for a year or even longer next time battery needeed to be changed, I know I did. Add to this you can easily destroy your watch with in-correct handleing. BEST BET, look for a small watch repair shop in your area for this battery change $10--$15.00 and peace of mind.

mcdevito75 Here, Best Bet is to look for a small watch repair shop in your area for this battery change.

mcdevito75 here Best Bet, look for a small watch repair shop in yourarea, most likely you need a battery or even better, loosened the one already in the watch.

mcdevito75 here, any Geneve watch is very good, from the little I know and without seeing the watch, note the hands carefully, if they are thick the watch could be from the 60"s or before. If the hands are thin then the age of the watch could be from the 70"s, the Geneve name though is very good, they also have Geneva name but Geneve is the name to look for. Also a jeweler can give an approx. age.------- Thick hands, 60"s or before, ------- thin hands, 70"s and after.

RECOMENDATION:

Contact a local official Rolex dealer to address the problem.

GOTO:
http://www.rolex.com

To find a local dealer.

Hope this tip helps.

R/
David

Found an email address in Switzerland for Bulova. Contacted them and they've given me the name & address of a Bulova dealer here in town.

go to a local jewler they'd be the ones to be able to help you get a new one or repair your old crown it probably just needs to be sodered if just the crown and not the whole crown assembley

Take the watch to a jewlers, let him replace the battery they usually only charge for the new battery,
and they do not cost much.

Your watch needs to be clean,so that the old oil will be taken out,and change it with a new fresh oil.Old oil can caused the machine to stop,because old oil become sticky causing machine small gear stuck up and gear shafting can't move .

Hope it may help you;

Regards;
VOTIT