Noisy when my machine is washing it makes a squeaking noise and some times a grinding noise, it is very noisy when it spins, a real grinding noise/

Hi,

Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you for taking the time to educate me. " - teresa241964

Hi,

Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you for taking the time to educate me. " - teresa241964

No, not if the noise is only when rinsing, if it makes the noise when spinning generally then possibly but if only noisy when rinsing sounds like a filter blockage on the waste pipe. clean out the filter behind the flap on the bottom of the front panel

main tub bearing failure.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

THE BRAKE IS VERY FAMOUS FOR THAT NOISE NOT INSPECT THE PUMP ,, CAN BE GRINDING ON BOTTOM BASE OF WASHER ,, BEARING POPPED OUT

That sounds like a clutch problem - probably just worn and need replacement. Will definitely need to pull to find exact fault.

Regards

hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Looks like the gear case is going out on these and possibly the pump for Lucinda61

Belts are an easy change. You access from the back of the machine. 3 or 4 screws take off the plate whihc will expose the belt. BE SURE TO UNPLUG 1st! so you don't get scocked

Sounds like the brakes have become noisy, just like in an automobile if they glaze over they start to squeak. This really wont hurt the machine but if you dissasemble the machine (or pay a professional at the most 1.5 hr labor since your washer is the best design and fairly simple to repair) and clean the brakes (basket drive assy) and the drum (part of the tub support)