SE K800i Phone lock during flashing of firmware using setoll

Wotan Server offers a reliable way to reset the password on your SE W100i phone. It costs 1.99 Euro (about US$2.70).

Sony Ericsson Spiro Phone Password Reset
During Firmware Flashing your Spiro Phone Password is reset and disabled.
Sony Ericsson Spiro Firmware Flashing

press star and then then key in the top right corner

you can reset it using setol lite
dont try this on your own read through guides on
www.topsony.com

if you do it wrong you could brick your phone bassically you would have to spend a while trying to find the firmware to reflash your phone

ansers to a couple qestions you might have might be on this page

http://www.topsony.com/forum/se-tool-2-lite-f46/can-i-unlock-k800-t7315.html

Re-flash the FS & Main firmwares on it with setool using the "K810_R8BA024" firmware, then installing the quick access patch to enable further patches.

You need to flash the phone with correct firmware. join this forum (free), you'll learn how to flash, unlock, debrand and mod your SE phone. http://forums.se-nse.net/index.php?s=cb3baa5dabe210ea073e3b56aa6ff209&act=idx (copy and paste in browser)

Try using Sony Ericssons software update utility to update the firmware or reinstall the existing firmware...

Its available at the Sony Ericsson website, unfortunately the K800 does have quite a few software bugs, white screen of death, black screen, red blinking light, etc...

Please note doing this will delete anything saved on the phone, if you can try using the Mass Storage mode to backup items like images... also if the phone was flash patch unlocked then it will need to be unlocked again

hi
the solution is to reflash phone a phone is similar to a computer
flashing is just like reinstalling your operating system on your computer to bring it back to factory settings

You will need to reflash the phone's firmware to correct this issue on the phone. You can do this online at topsony.com or take the phone to a mobile service center and have that done.

Try using S.E Update service.. It will update your flash memory as well as the firmware. Just follow the instruction when updating

Use SETOOL Lite to reflash your phone's software again, there is no need to use the updater more cause it's useless.
http://forums.se-nse.net/index.php?showtopic=13115
Download it read the instructions and reflash the phone. It will be ok after that.