My computer is stuck in a roboot loop. i have windows xp OS. it suddenly shutted down n when i start my computer now, it shows me a blue screen with message that a problem has been detected and windows has been shut down to prevent damage to your computer . it gives the technical information as ***STOP: 0X00000024 (0X00190203, 0X86F1FB00, 0XC0000102, 0X00000000)

Which OS do you have? Have you tried booting to safe mode?. Restart the computer. Immediately after the BIOS post ends, start tapping the F8 key repeatedly. when Windows Advanced Options menu appears, select safe mode and see whether it boots completely without blue screen(BSOD)

hi

i am not sure i understand.. what OS did you have originally ? id you isntalled Windows 7 recently, did you format the hard disk drive entirely ?
have you downloaded all the drivers (audio, video, BIOS, etc..) go to the link below to get the drivers
usually a blue screen could be that teh memoryt module(s) are not seated properly. shut down the notebook, remove the battery, remove the memory modeule plastic door, remove the memory module one a timne and reseat them properly. replace the battery, start up the computer after plugging in the AC adapter .
does it show blue screen ? if so, download all the drivers from the link i provided.

http://support.dell.com/support/downloads/driverslist.aspx?c=ca&cs=cabsdt1&l=en&s=bsd&ServiceTag=&SystemID=LAT_E5400&os=WLH&osl=en&catid=&impid=

please send me 4 thumbs up

SEE IF THE APP. YOU ARE TRYING TO INSTALL IS COMPATIBLE WITH YOUR OS.
REGARDS
PLZ. DON'T FORGET TO RATE THIS.

Try tapping F8 when the acer window shows, when it shows the muliboot option, scroll down to "Last Known Good Configuration" and hit enter. If it does not boot normally, you will have to get an external dvd drive and boot off the drive with a windows installation disc to perform a repair.

ati2dvag seems to have a problem with XP SP3
I don't know if you have SP3, but if you do, try rolling back to SP2

Method 1: Use the "Add or Remove Programs" item in Control Panel
1. Open the Control Panel
2. Select Add Remove Programs
3. Click to select the Show Updates check box.
4. Click Windows XP Service Pack 3, and then click Remove.
5. Click Finish to restart the computer after the removal process is complete.
Method 2: Use the hidden $NtServicePackUninstall$ folder
1. Click Start, click Run, type c:\windows\$NtServicePackUninstall$\spuninst\spuninst.exe in the Open box, and then click OK.
2. When the Windows XP Service Pack 3 Removal Wizard starts, click Next.
3. Follow the instructions on the screen to remove Windows XP SP3.
Method 3: Use the System Restore and select a restore point prior to SP3

first try that safe mode option and do log in . when you successfully log in restart your computer . this happen mainly when there is sudden loss of power supply to the cpu. shut down your computer properly by pushing the power button on the cpu

What you need to do Is to take the Operating System reinstall disk that you got with your computer and boot from that. Once you get to the main screen press the option for a repair. Follow instructions on the screen. If you need more detail on how to do this just tell me and I will help.

All The Best,
RCF

do a operating system repair, use the windows xp disk to do this

Hi

When you boot the computer back up go into Safe Mode and check to see if you can roll the computer back to the point before you installed the software.

If so this should work. If it works then run a virus scan, a defrag of the hard drive and cleans the temp files.

OR

You can do a diagnostic startup and uninstall Onecare. So once that it is uninstall ed it should be smooth sailing.

Here is a link for some startup / diagnostic software you could try after booting.

I hope this helps

/Shawn

Do you mean the computer is sutting down but on the monitor showes different colors if so you might have a problem in the system you might have to reinstall you OS if the computer does shut down but the monitor stays on and flashes different colors you have to shut the monitor down manually with the power button on the monitor.