Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

Related Topics:

Posted on Aug 06, 2017

Bluetooth Adapter for Kodak 5300 Ai) printer

I own a Kodak 5300 AiO printer. After prolongued frustration I managed to get a USB 2.0 Adapter (Sold only by Kodak, and not available in Canada), and now I need help to install it. I tried setting it up for my Toshiba Sattelite L300D-06N Laptop (Windows 7) but was advised that Bluetooth does not work with the printer with that adapter. MS solutions has been unable to offer solutions. Can you help?

5 Related Answers

Anonymous

  • 41 Answers
  • Posted on Mar 05, 2008

SOURCE: 2 Problems: 1) Unable to get printer to print from desktop; 2) Kodak SW won't install on laptop

Download and install the new software and printer firmware from kodak.com (link below - firmware and software is the same for all the 5000 units). Do not use the CD, and Uninstall all previous versions before installing the new software you download from the site.

http://www.kodak.com/global/en/service/downloads/dln_ekn033540.jhtml?operatingSystem=mac_os_x_10_5_x&downloadLanguage=en

I hope this helps. If you still have problems respond to this message with what happens and I will try and get you more help

SDtester.

Ad
ginko

Ginko

  • 19396 Answers
  • Posted on Mar 08, 2009

SOURCE: trying to install kodak easyshare aio 5500 printer

Visit the 5500 All-in-One Printer Support Center to find answers to your product and service questions.

Download software drivers here.

See also :

User manual
Tutorials
Frequently Asked Questions
Download Inkjet Printer Software

Anonymous

  • 17 Answers
  • Posted on Mar 28, 2009

SOURCE: Kodak Printer Bluetooth Capacity

I appoligize for the wait.

uh, oh yea,
well install your sticks!
your computer may only need one stick because your printer is bluetooth enabled (unless your the sticks say that you need two.)

1) turn on the printer
2) plug the sticks into your computer.
3) with your bluetooth software find the printer.(look for your printer name, or somthing that resembles a shorter version of its name.)
4) connect to the printer and print your photos

I don't know what software you are using but usually their is a "step one, two", or more that the software may have but again I don't know what you use.

Anonymous

  • 60 Answers
  • Posted on Jul 17, 2009

SOURCE: how to clean photo jam at my kodak all in one printer 5300 aio ?

if there is a paper jam then open the rear access door and look for any paper or piece of paper stuck in there if not then try and roll the roller slowly to check for paper jam........if you still cannot find the paper then open the front access door as if you are trying to replace the ink cartridges and look inside if you can see any paper stuck in there or not........if still no paper restart the printer after 30 seconds and check if still getting paper jam or not............if yes then contact Kodak tech support.......

Anonymous

  • 295 Answers
  • Posted on Jan 01, 2010

SOURCE: Cannot install Kodak AiO ESP 5 printer in Windows 7

Kindly call 1800 421 6699 and ask for a supervisor straight away.The representatives can connect you to supervisor after taking your informations.The supervisors can remotely access your computer and get the software installed on your computer.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3helpful
2answers

Looking for the driver software for the Kodak EASYSHARE 5300 all-in one printer

The Kodak 5300 aio is as unique as a '83 Buick Diesel I once owned. Only difference is it can't jump on a tow truck each time one passes by. Unleashing this abortion on the consumer is as sinful as was G.M. After two new print heads, hours of
frustration, and utilizing all known cuss works, I am finally carrying it out to the trash. Fingers are now crossed hoping the trash collector will accept it. &*^%&*. Shame on you Kodak.
Solution is.....buy any other brand of printer if you want peace of mind. [email protected]
0helpful
1answer

Printer will not scan

Kindly install the Kodak all in one home center on your computer,connect your computer and printer via usb cable and then try 2 scan. Ur issue will be fully resolved. Click on scan pictures and documents On kodak aio home center and then click on scan now,follow the instructions.
0helpful
2answers

Kodak 5300 all in one printer will not scan. Cannot get on line with 5300 a10 home center program, tells me printer is not connected

try to unplug replug the usb cable of the printer.

You may also go to control panel printer and faxes and look for the printer of your 5300 now if you see 2 icons delete them both then exit to printer and faxes. and unplug/replug your USB cable then restart computer.

If this issue not solve try to uninstall the software and download the clearutility kodak.com/go/clear. then after doing this restart computer.
1helpful
1answer

I have a kodak esp9 on win xp wireless connection. Constantly get the 1-2010 error code and kodak aio home center will not open and the printer will not connect any solutions?

  1. From your computer, access Device Manager.
    • For WINDOWS XP OS:
    • Right-click My Computer, then select Properties.
      • Select the Hardware tab, then Device Manager.
  2. Select View > Show hidden devices.
  3. Select Printers.
  4. Select Action > Uninstall.
  5. Select Action > Scan for hardware changes.
  6. Double-click the KODAK AiO Home Center icon. If the error occurs again, go to the next step.
  7. Set administrator rights for the Home Center application:
      • For WINDOWS XP OS:
        • Right-click on the Home Center icon.
        • Click Properties.
        • Click the Compatibility tab.
        • Clear all the check boxes.
        • Click Apply and OK.
    1. Double-click the KODAK AiO Home Center icon. If the error occurs again, go to the next step.

      IMPORTANT: In the next step, before you install the Home Center Software, make sure you disconnect the USB cable. Then, connect the USB cable when the software installation instructions tell you to do so.

    2. Upgrade the software and firmware for your printer:
0helpful
1answer

Kodak 5300 aio

Call tech support. They will send you a new print head.
0helpful
2answers

The Infamous Kodak 5300 "Printhead Missing or . . ." Error Message

You need a new printhead from Kodak AiO support. After that is in and you do not have the error message anymore, download the latest firmware at www.kodak.com/go/5300downloads
0helpful
1answer

Kodak 5300 printer

1-Deep clean and calibrate the printhead
2-Try a firmware update @ www.kodak.com/go/downloads
3-Try a removal and reinstall of the printhead and inks
If all this fails, call Kodak Aio support : 1-800-421-6699 (USA)
0helpful
1answer

Kodak AIO Easyshare 5300 scanning problem

Could be USB connection if you have another cable try it. Try connecting to different USB ports on your PC. If you have a Powerd USB hub lying around try connecting the printer to the PC through that.

Also try disconnecting all USB devices including the printer. Reboot your PC. Connect only the printer and try and scan.

Some times multiple USB devices dont work when they are both connected to the same PC.

Hope this helps!

SDtester
1helpful
1answer

2 Problems: 1) Unable to get printer to print from desktop; 2) Kodak SW won't install on laptop

Download and install the new software and printer firmware from kodak.com (link below - firmware and software is the same for all the 5000 units). Do not use the CD, and Uninstall all previous versions before installing the new software you download from the site.

http://www.kodak.com/global/en/service/downloads/dln_ekn033540.jhtml?operatingSystem=mac_os_x_10_5_x&downloadLanguage=en

I hope this helps. If you still have problems respond to this message with what happens and I will try and get you more help

SDtester.
13helpful
5answers

Home Center will not open...Can't scan

I needed to reload my AiO Home Center software and no one seemed to have the correct procedure. Maybe if you remove & reinstall yours it will resolve your problem. This procedure worked for me on my XP-machine:
1. got to Control Panel/Printers&Faxes and delete the printer
2. go to your Hardware/Device Manager/Universal Serial Bus Controllers, right-click on USB Composite Device and select Uninstall
3. go to Control Panel/Add/Remove Software and remove the EasyShare software
4. disconnect the cables from the Printer
5. download from Kodak.com the program "install_aio.exe"; run the program
(I selected only AiO+EasyShare+Software Updater to load)
6. followed the prompts after the sw installed to reconnect the Printer cables
7. rebooted

WORKED for ME !
Not finding what you are looking for?

256 views

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...